chris r Posted October 24, 2021 Author Share Posted October 24, 2021 19 minutes ago, shrike said: So B16/18 VTEC head/intake swap on the cards? (with ECU to suit) Thats the plan if I can find a head that's not $500 and needs a refresh. The other plan would be throw a set of valve springs and cams at it https://store.briancrower.com/products/bc0022?_pos=2&_sid=ce6205653&_ss=r&variant=1609953795 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted October 29, 2021 Author Share Posted October 29, 2021 Thanks @brocky41 for the deal on the glass and surrounds. All installed and water tight now Sold the euro r (took my amp and speakers out) Installed sound deadening and used Industy standard techniques to install the speakers I need to find some decent 6" for the front. I incorrect measured and ordered 5.25 which were out of stock luckily 5 1 Quote Link to comment Share on other sites More sharing options...
Popular Post chris r Posted October 31, 2021 Author Popular Post Share Posted October 31, 2021 It's interesting to see what treasures you find in a car There were 4 egg balls, various water bottles, three modems. A million chargers, a note from dad and some receipts They got shafted on the rocker cover gasket. Genuine honda retails at 25+gst Took it to wash world and its cleaner now. Those wheels need to go ASAP. Might go grab my p1s off the shuttle 10 Quote Link to comment Share on other sites More sharing options...
87creepin Posted October 31, 2021 Share Posted October 31, 2021 That's a pretty likeable father to be honest. Also what's the main relay like? If you plan on keeping it for a lot of kms I have a new one laying about, sometimes the resoldering is only good for x amount of ks, may or may not fit as its for older honduhs.. 2 Quote Link to comment Share on other sites More sharing options...
chris r Posted October 31, 2021 Author Share Posted October 31, 2021 8 hours ago, 87creepin said: That's a pretty likeable father to be honest. Also what's the main relay like? If you plan on keeping it for a lot of kms I have a new one laying about, sometimes the resoldering is only good for x amount of ks, may or may not fit as its for older honduhs.. Yeah I got good wholesome dad vibes from that note. Dad was probably paying for aa to look after the car too. Main relay has been fine so far (touch wood) Could be keen on it for the shuttle though 1 Quote Link to comment Share on other sites More sharing options...
87creepin Posted November 1, 2021 Share Posted November 1, 2021 Send me pics of yours and I'll take a look at mine and see if it'll work. I got it for the lude because the original was too far gone. It should work as I used an ef part no. 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 2, 2021 Author Share Posted November 2, 2021 Fixed the dizzy o ring and cam seal o ring so should fix those leaks. Did plugs and leads too while it was apart Did the sound deadening on the passengers door 3 Quote Link to comment Share on other sites More sharing options...
mjrstar Posted November 2, 2021 Share Posted November 2, 2021 What's the deal with the massive hole in the inlet manifold? Is it some oil breather type thing? Quote Link to comment Share on other sites More sharing options...
chris r Posted November 3, 2021 Author Share Posted November 3, 2021 They have a cast Ali chamber on top for reasons? Maybe increase plenum volume or reduce doort noises? One of the earlier pics has shows the plenum sitting on top Quote Link to comment Share on other sites More sharing options...
mjrstar Posted November 3, 2021 Share Posted November 3, 2021 Interesting, I saw that thing in an earlier picture but assumed it was just a cover thingee. Quote Link to comment Share on other sites More sharing options...
Alfashark Posted November 3, 2021 Share Posted November 3, 2021 Helmholtz resonance chamber thing - My Gti-6 had one too. Noise + pressure waves to maximize intake runner pressure/flow/magic. 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 10, 2021 Author Share Posted November 10, 2021 Mixed success at pick a part. Soneone beat me to the manual crv so that saved me some money. I grabbed the flywheel and a pedal box for hording though. Nabbed a set of pioneer speakers and nz new radio for the accord and nabbed the washer bottle cap as the old one was fucked Front speakers finally arrived for the orthia Had to trim the mounting tabs so they would fit Holes don't perfectly line up but they are attached Amp fits perfectly under the seat which is good. Until you need to tune it 8 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 11, 2021 Author Share Posted November 11, 2021 New old stock sub for more doof Went 10" as it needs a smaller box so will be easier to live with. The 12" takes up most of the boot space 3 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 12, 2021 Author Share Posted November 12, 2021 Nz new radio and trim fitted. Goes hard for what it is now. Had air conditioning regased today. The compressor is fucked and had black poo all through the lines. It kinda works on the motorway now. Will Rock auto a tx valve, filter and seal set over and find a compressor locally then find some caring and will clean the lines and condenser out in the future 2 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 12, 2021 Author Share Posted November 12, 2021 The gc who did the regas noticed a coolant leak. Clearly I missed that spring clip. It must have popped off on the drive over as it was still dripping. Didn't get hot or cold on the gauge. Refitted and refilled and it's as good as it was 2 1 Quote Link to comment Share on other sites More sharing options...
87creepin Posted November 13, 2021 Share Posted November 13, 2021 How much was the regas? Cold air sounds lush Quote Link to comment Share on other sites More sharing options...
chris r Posted November 13, 2021 Author Share Posted November 13, 2021 8 minutes ago, 87creepin said: How much was the regas? Cold air sounds lush Dude quoted 160 but did me a solid as compressor was fucked/ill have to go back for another regas once I fix everything Kashmir Auto Repairs shop in mt Roskill. Really good service and dude was a solid gc 1 Quote Link to comment Share on other sites More sharing options...
87creepin Posted November 13, 2021 Share Posted November 13, 2021 That's a good price. Tempted for the daily to have nice cold air so im not sweating my tits off. Haha 2 Quote Link to comment Share on other sites More sharing options...
chris r Posted November 13, 2021 Author Share Posted November 13, 2021 1 hour ago, 87creepin said: That's a good price. Tempted for the daily to have nice cold air so im not sweating my tits off. Haha Do it. Its so worth it. The other two hondas have working ac and it's so nice 1 Quote Link to comment Share on other sites More sharing options...
Popular Post chris r Posted November 16, 2021 Author Popular Post Share Posted November 16, 2021 So I've been pining some wheels for a long time now, I found a set in America that had some on s a pre order. covid delayed shipping etc etc. Shop never replied to any communications (lucky I never gave them any money. I found another set on aliexpress but couldn't justify the freight. Nearly gave up on the pine then they popped up on trademe. Mrs Chrisr said I wouldn't shut the fuck up about them so I should get them. So I did 13 7 7 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.