datlow Posted December 30, 2014 Share Posted December 30, 2014 so I got this last Christmas 1980 something honda cx500 with hopefully only a worn waterpump mechanical seal seller seemed to think it was dereg too (carjam was saying otherwise) so drove from Hamilton to napier and picked er up promptly went to the post shop and changed ownership and put rego on hold, best $10 i ever spent then we sold our house and moved to wellington and ive been super busy working and procrastinating until I figured I have a week off so should get some parts sorted saw that dime city had free shipping so ordered some shorter shocks, clip ons and smaller gauges (found some similar ones on trade me the next day for cheaper....grr) before after no more wheel gap also received a package of seals and gaskets etc from cxphreak in aussie got all the gaskets and orings etc that I need for same price as one gasket from Honda chur so I just need to get of my arse and put all the seals in then reassemble into something resembling this http://www.moto-verso.co.uk/motorcycles/project-cx-cx500-cafe-racer/ 3 Quote Link to comment Share on other sites More sharing options...
datlow Posted January 1, 2015 Author Share Posted January 1, 2015 Hmm not so good, this is where the oil seal is meant to seal, thinking I'll try and get a speedy sleeve or machine it down and get a smaller seal, back to waiting for shops to open..... Quote Link to comment Share on other sites More sharing options...
artyone Posted January 8, 2015 Share Posted January 8, 2015 I was down my mates just before Christmas and he had one of these in his stash. I was looking for bikes I could use to build seats, rear guard assemblies etc with a mind to small scale production so I could actually do you a seat if you wanted one. Quote Link to comment Share on other sites More sharing options...
datlow Posted June 13, 2015 Author Share Posted June 13, 2015 [/img] Quote Link to comment Share on other sites More sharing options...
datlow Posted June 13, 2015 Author Share Posted June 13, 2015 Been doing some more bits and bobs, motors back in decided the gouge in the camshaft will be ok(hopefully-think it's actually seeping a tiny bit of oil so will prob speedy sleeve at some point) Oil seal for mechincal fan is leaking-the only seal I didn't replace! Decided to cut the rear off just need to find a welder to put new hoop on and weld the exhausts up (Ex Harley de baffled ones hopefully not to loud) Cleaned up the wheels and etch primed going to chuck some black paint Over them and front forks- currently stripped for new seals and oil maybe some more low to match the arse too Quote Link to comment Share on other sites More sharing options...
MrMcdoll Posted June 24, 2015 Share Posted June 24, 2015 I have one of these - but the Gl400 version, Awesome bike, though I've had to do a fair bit of work to get it going okay. The timing chain tensioner on mine crapped out and as a result the chain had milled away part of the block! I'm very keen to see how you do your seat! Planning to fab up room for a pillion? Quote Link to comment Share on other sites More sharing options...
datlow Posted May 11, 2016 Author Share Posted May 11, 2016 Sooo been awhile, yeah the timing chain on mine had gone but previous owner sorted that (but stuffed the water pump seal) Got hoop for rear, then changed mind for now will attempt to fit original taillight and see if it's any good/ get it going and see if it can get a wof Wheels painted black and guard chopped down (will paint black later along with frame once I know it's all wofable) url=http://www.iforce.co.nz/View.aspx?i=mc034eel.s3s.jpeg][/url] Quote Link to comment Share on other sites More sharing options...
datlow Posted May 11, 2016 Author Share Posted May 11, 2016 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 11, 2016 Author Share Posted May 11, 2016 1 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 11, 2016 Author Share Posted May 11, 2016 Need to rewire new gauges and shorten loom as it won't fit in new smaller headlight bucket, want to relocate key and fuses from above triple clamps to tidy it all up Quote Link to comment Share on other sites More sharing options...
datlow Posted May 5, 2018 Author Share Posted May 5, 2018 Shit 2 Years..., got enthused after nats and tried starting this old girl cleaned carbs and modded the starter motor (poor earth for the neutral brush so drilled and tapped to the alloy housing) fired into life and then had fuel oozing out from all the cruddy seals turns out they made a different sized fuel tap for like 2 yrs and they are nla, all the Chinese ones are different so drilled the rivets and bought New seals tapped and fitted screws Found a guy on trade me selling lots of Kiehin carb kits so asked and he was able to supply a kit for same price as all the USA/Europe ones without the freight! ( t.me name Nikau) also pulled the carbs apart and had them vapour blasted and re zinced 4 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 5, 2018 Author Share Posted May 5, 2018 Oh and I “rebuilt” the shocks ages ago but they were shit could basically bottom them out just pushing on them, can buy new/upgraded springs etc for them but I then I saw a guy was selling a rolling hyabusa for cheapish so grabbed it, bought some all balls conversion bearings and slotted it on theres aftermarket clamps available a I should probably buy one as there’s not that much steering angle (have beaten the tank a bit for more) turns out it’s probably cheaper and easier to buy cbr forks as they use the standard bearing and may have more angle, meeh 2 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 5, 2018 Author Share Posted May 5, 2018 4 Quote Link to comment Share on other sites More sharing options...
finn Posted January 7, 2019 Share Posted January 7, 2019 Ben here too, i have 2 cx500s of procrastination and one with engine out but that wont be for long, need one going....lol if i can ever help with anything just let me know....................dont see to many of these bikes around wellington nowdays............ 3 Quote Link to comment Share on other sites More sharing options...
datlow Posted January 7, 2019 Author Share Posted January 7, 2019 @finn, awesome will do and likewise if you need a hand ive sold a few bits of this to 2 welly guys with them so must be a few lurking in sheds Quote Link to comment Share on other sites More sharing options...
finn Posted January 7, 2019 Share Posted January 7, 2019 yeah ive seen a blue one coming out of the mt vic tunnel heading to kilbirnie a few times and a brown silverwing or gl500 going round the bays only once...................its so good to ride something rare, so many ppl remember them. how much work till she ready to ride? Quote Link to comment Share on other sites More sharing options...
datlow Posted January 7, 2019 Author Share Posted January 7, 2019 not much really, could of had it on the road a few times but keep changing my mind etc, have the carb kits to fit, finish the seat, clean up the front end wiring as it wont all fit in the new headlight, then see if anyone would certify the new front end and wof etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.