z18et1200coupe Posted December 16, 2014 Share Posted December 16, 2014 Yo team. I changed the gearbox in my ute (D22 Navara), and my old electronic speedo sensor doesn't fit this box. The pic shows the cable speedo unit (that fits the gearbox), and my old electronic sensor (way too long). Anyone know what would fit that's electronic? Possibly 1990ish era Nissans? Cheers! On a side note I also made a stainless exhaust. Stainless is cool 1 Quote Link to comment Share on other sites More sharing options...
0fnsiv Posted December 16, 2014 Share Posted December 16, 2014 S14 silvia? Quote Link to comment Share on other sites More sharing options...
kicker Posted December 16, 2014 Share Posted December 16, 2014 The electronic sensors from Silvia and Skylines boxes look like your cable driven speedo drive up top. Not 100% sure which models exactly but my S14 box has a sensor like that. One thing I do remember seeing (can't remember if this only affects cable drive ones) is that some of the speedo drives have the gear offset differently but if you find that is the case it should just be a matter of rotating it 180 degrees and cutting a new mounting tab slot. Quote Link to comment Share on other sites More sharing options...
z18et1200coupe Posted December 17, 2014 Author Share Posted December 17, 2014 I tried a unit out of an CA18 box I had lying around. It's a wee bit short. I'll try and find a skyline or 200sx one to try. If I can't find anything I'll trying mating the electronic transducer onto the mechanical shaft, shouldn't be too hard.. Touch wood Quote Link to comment Share on other sites More sharing options...
downtrail Posted December 17, 2014 Share Posted December 17, 2014 Go for a r33 electronic speedo sender. Should fit as I use the cable driven navara units when using r33 gearboxes in r32s etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.