Nominal Posted January 13, 2021 Share Posted January 13, 2021 1 hour ago, kws said: If my front swaybar measures 16.5mm.... would I go with 16mm or 17mm poly D bushes? 16. 1 1 Quote Link to comment Share on other sites More sharing options...
cletus Posted January 13, 2021 Share Posted January 13, 2021 Battery I purchased last weekend A question for purveyors of car parts Does that sticker mean its past it's best by date? @GuyWithAviators Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted January 13, 2021 Share Posted January 13, 2021 Just now, cletus said: Battery I purchased last weekend A question for purveyors of car parts Does that sticker mean its past it's best by date? @GuyWithAviators Means century supplied it septe.ber 2020 and repco is too lazy to get their batteries rotated by the century rep regularly. You warranty starts from September unless you keep your receipt and shit i guess 2 1 Quote Link to comment Share on other sites More sharing options...
GuyWithAviators Posted January 13, 2021 Share Posted January 13, 2021 What he said. If you didn’t use it yet take it back to repco or maybe century with the receipt and ask to swap for a newer one. but tbh irl it’ll be fine and as Dolan said warranty starts from purchase not manufacture date. 1 1 Quote Link to comment Share on other sites More sharing options...
Yowzer Posted January 13, 2021 Share Posted January 13, 2021 Oh is it year-month, not week-year? Quote Link to comment Share on other sites More sharing options...
GuyWithAviators Posted January 13, 2021 Share Posted January 13, 2021 Some makes are different or have their own hieroglyphics but century is year - month found a 19-04 the other day at the back of the shelves lel 3 1 Quote Link to comment Share on other sites More sharing options...
Styles Posted January 13, 2021 Share Posted January 13, 2021 14 hours ago, Dolan said: Means century supplied it septe.ber 2020 and repco is too lazy to get their batteries rotated by the century rep regularly. You warranty starts from September unless you keep your receipt and shit i guess Last time I was working in a parts department all the century guy used to do was swap the stickers... to be fair he did put the tester on them first. 3 Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted January 14, 2021 Share Posted January 14, 2021 Yeah that's sufficient Quote Link to comment Share on other sites More sharing options...
kws Posted January 14, 2021 Share Posted January 14, 2021 7 hours ago, Styles said: Last time I was working in a parts department all the century guy used to do was swap the stickers... to be fair he did put the tester on them first. Lol, both places I worked Century actually swapped the batteries. They probably just swapped stickers at depot and we got it back the next week, but hey. Quote Link to comment Share on other sites More sharing options...
kws Posted January 14, 2021 Share Posted January 14, 2021 Did I do a bad thing? Did I buy cheap, buy twice? Im replacing the front wheel bearings in the TVR and thought I scored some cheap new bearings. Problem is I didnt check the brand (there isnt one on the website) and it turns out they are Chinese DSM brand bearings. I've already pressed the outer race in, so should I just send it and run them, or pull it out and replace with TIMKEN or the likes? They seems to roll smooth enough when spun by hand but that isnt an indicator of how long they will keep rolling when the weight of the car is on them. Quote Link to comment Share on other sites More sharing options...
tortron Posted January 14, 2021 Share Posted January 14, 2021 well they are already paid for and installed. Quote Link to comment Share on other sites More sharing options...
Nominal Posted January 14, 2021 Share Posted January 14, 2021 And, it's a TVR, how many miles will you be doing? 2 Quote Link to comment Share on other sites More sharing options...
kws Posted January 14, 2021 Share Posted January 14, 2021 Guess I'll just send it then. Got to be better than the old bearings which had been over tightened. 3 Quote Link to comment Share on other sites More sharing options...
h4nd Posted January 15, 2021 Share Posted January 15, 2021 Simple ways to fuck up phish scammers 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted January 16, 2021 Share Posted January 16, 2021 Haha what about Google form scams. 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted January 17, 2021 Share Posted January 17, 2021 Even more annoying is Google adds are popping up for gold buyers..... seriously fuck off. Quote Link to comment Share on other sites More sharing options...
ajg193 Posted January 22, 2021 Share Posted January 22, 2021 Does anyone on here know much about valve clearances and ramps on flat tappet, solid lifter cams? For example, aftermarket camshaft profile calls for 0.3 mm inlet clearance and 0.35 mm exhaust clearance Factory profile specifies 0.2 inlet and 0.3 exhaust Will setting the aftermarket cam to 0.275 inlet and 0.325 exhaust in order to reduce noise cause too many problems long term? The duration for the cam is like 180 or 190 deg at 0.05", with advertised duration of around 260 deg. Would this make the ramps about 35-40 deg duration? Quote Link to comment Share on other sites More sharing options...
Guest Posted January 22, 2021 Share Posted January 22, 2021 If you have an aftermarket cam, why are you even comparing to the factory? Just set it to what is calls for and be happy. If you dont like a bit of valvetrain noise put the factory cam back in it and clean up after youself with your grannypanties. 4 Quote Link to comment Share on other sites More sharing options...
Yowzer Posted January 22, 2021 Share Posted January 22, 2021 Chuck some MBL8 in it m⁸ Quote Link to comment Share on other sites More sharing options...
Yowzer Posted January 22, 2021 Share Posted January 22, 2021 Also, go with the specs for that cam. They're probably different for a reason. If the valve train noise concerns you, you have too many mufflers. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.