nickrock Posted January 19, 2017 Share Posted January 19, 2017 I got a few spare comma and heel dollies will send them up might still have a shrinking hammer wit busted handle 1 Quote Link to comment Share on other sites More sharing options...
nickrock Posted January 19, 2017 Share Posted January 19, 2017 I got a couple of hammers with pick ,one I cut off and welded a old smallish cold chisel ,great for forming a bend in a panel or reforming a bent one 1 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted January 19, 2017 Share Posted January 19, 2017 Nick you are a bloody champion. Quote Link to comment Share on other sites More sharing options...
Mr Vapour Posted March 6, 2017 Share Posted March 6, 2017 Always enjoy updates on this. For general knowledge, how much is the cost of the plating. 1 Quote Link to comment Share on other sites More sharing options...
AllTorque Posted March 6, 2017 Share Posted March 6, 2017 2 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted March 7, 2017 Share Posted March 7, 2017 15 hours ago, Mr Vapour said: Always enjoy updates on this. For general knowledge, how much is the cost of the plating. Thanks guys!, Haha Gold zinc passivation (it's electroplating) is pretty cheap. I couldn't comment on actual price per KG (it's sent off by someone else for me) but I get everything done at Terei Brothers in West Auckland. They are bloody approachable so give them a call and ask any questions directly Also, be cautious as to what you get done- nothing high tensile or spring related (I'm not even too sure about things like seat rails or this handbrake lever.. I generally assume that if it's available electroplated via aftermarket sources eg my rear caliper handbrake brackets then I don't mind doing it myself ) Any input @cletus about electroplating custom made seat rails etc? Quote Link to comment Share on other sites More sharing options...
nickrock Posted March 12, 2017 Share Posted March 12, 2017 You must have been reading my mind re hinge bushes was going to drop you a message on how tight were the pins to get out did you get pins as well as bushes 1 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted March 12, 2017 Share Posted March 12, 2017 As per FB, I didn't get pins, I will turn some m10 bolts down to 11/32nd then blacken them and retain with a c clip. I just can't handle $32 for 4 pins! I know why this cost this much and I'm fine with that but just not when I'm paying. The part number I ordered is Product Code: JAOD14551 Quote Link to comment Share on other sites More sharing options...
tortron Posted May 30, 2017 Share Posted May 30, 2017 Finished the instrument panel? I don't quite think I have space for a backlit symbol, but I think I'll grab some of the flat top LED's and use them and a small label for the idiot lights 1 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted May 30, 2017 Share Posted May 30, 2017 Hey man. Still need to get a few gauges for it.. to be perfectly honest I can't remember what I decided to do about the indicator lamps.. I think I will use the plastic flat led things, mask off the symbols with professional cut vinyl and spray black then clear (like I did the switches) I ended up not being happy with those stainless bolt ones. Quote Link to comment Share on other sites More sharing options...
mjrstar Posted May 30, 2017 Share Posted May 30, 2017 metallurgist i would suspect? 1 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted May 30, 2017 Share Posted May 30, 2017 Yeah that haha. Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted January 2, 2018 Share Posted January 2, 2018 That fuel flap you have there might be the exact thing I require. May I trouble you for the outside diameter of the unit, and the pcd of the fixing screws please? Quote Link to comment Share on other sites More sharing options...
johnny.race Posted May 26, 2021 Share Posted May 26, 2021 @flyingbrick, any movement on LQ4 front? Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted May 26, 2021 Share Posted May 26, 2021 Good morning mate. Wow, have not been here for some time So dunno if you follow the two wheel stuff but the timeline was like. I buy a 525 KTM with the goal of getting it road legal I find out It cant be made road legal in NZ as its a SA import with no papers I buy a road legal 530 KTM with the agreement (with wife) that I sell the 525. I find a bloke that will swap both the 525 and the 530 for a Hayabusa. Wife is like, "fuck you, thats not how this was going down, you had 4k for a bike not 8k, we need that money" I hurriedly sell LS/car parts in an attempt to raise the 4k that i'd have otherwise made by selling a bike. It works. She's kinda happy but not really. I get a hayabusa. tldr I sold most of my really cool shit, but dont regret it. The ute (And beetle) are definitely on my mind and get thought about a few times each week. When things return to normal (And im not living in the shed) I'll be finishing off the last of the rust repairs and putting the kitset of parts together. No idea on what the engine will be but the allure of an LS has kinda been lost now that I have something fast. 2 Quote Link to comment Share on other sites More sharing options...
johnny.race Posted May 26, 2021 Share Posted May 26, 2021 @flyingbrick chur matey. Ta for the heads up. Nah, I'm not into bikes so don't read those threads. Hehe, I totally get life's nuances man and respect dudes taking matters in hand when confronted with them. Cheers. 1 Quote Link to comment Share on other sites More sharing options...
64valiant Posted February 20, 2022 Share Posted February 20, 2022 @flyingbrick do you still own this? Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 20, 2022 Share Posted February 20, 2022 yeah boi. Rego still on hold, replacement chassis bits ready to weld into place, the formed bits of floor ready to weld into place, etc etc. I have done probably 80% of the rust to date, what remains is ready to go once I can make smoke and dust. The only thing stopping it from being a roller is no diff center- its on the list Completely undecided on engine now. Sold most of my v8 stuff to fund bike stuff- and the bike stuff has made trying to make a car fast totally irrelevant. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.