63Ragtop

1963 VW Beetle:Ragtop Resto.

Recommended Posts

Now wiring is something I know nothing about, yet.

Image

what I do know is this is how I got the new loom from the back of the car, to the front.

Image

it was not easy, there is a tight spot somewhere up above the rear seat area, I used alot of masking tape, duct tape and vaseline to get that sucker up to the interior light and snap! went the old washing line I was using to pull it though.
Luckily I had run another wire for future rev counting, I actually ended up pulling the loom out of the interior light hole,use the loom its self to pull it though the tight spot, re-tapeing it to the line and then pull it though the A pillar.
:roll: :roll:

Image

look how clean that speedo it!!!

Image

engine hole.

Image

need to clean these up.

Image

  • Like 6

Share this post


Link to post
Share on other sites

forgot how tiny it is! I can stand at the front and reach the windscreen!

Image

Honda is allowed back in the shed(can fit back in)

Image

can't wait to get some weight in it and correct the stance.

  • Like 1

Share this post


Link to post
Share on other sites

wait wait, an actual update as well!

Image

box fresh out the acid.

Image

and new starter motor, 2 speed wiper switch and many small things, fresh out the metric nut.

:-)

  • Like 7

Share this post


Link to post
Share on other sites

all these small things take some much time.

Image

details details details. cleaned up door swtiches.

Image

stuck foam stuff under the tank.

Image

front end looking nearly complete!

Image

this is the problem with my old 67 fuel sender, if It's any where near full it will leak and ruin any new paint. :cry: 
any suggestions on how to fix this small but important issue, would be great, or should I give up and convert to the electric gauge as my gauge wire thing is bung as anyway.

  • Like 1

Share this post


Link to post
Share on other sites

I feel the wiring is going to beat me on this thing, I've got 98% all hooked up and I'm sure correct, but the last few details are tripping me up. things like the wiper motor and switch which is because they are 2speed and from a later car they appear to need a couple extra wires, also the Alternator for the same reasons.
Adding to the confusion is the loom seems to be missing a few small, separate small wires, like the one for the speedo light and one for the flasher unit, both of which I was able to salvage from the old looms.
I'll be happy if anything works and it don't catch on fire!
Also had a frustrating night last night trying to get the door window scrapers in, or rather to stay in! very tight work and my fingertips are sore today, was hoping to have the drivers door finished last night, but by 1am I had to give up!

Image

Image

help!

  • Like 5

Share this post


Link to post
Share on other sites

A small but important part to getting a car legal on the roads. Really need to be black.

Image

It's funny, this car has been a shell for so long, every time I attach another part it's like I get some kind of shock, I don't like it, it looks so cluttered! after a day or two my brain has caught up the new part look normal again. :lol: 

Image

uh-oh.

Image

time for a clean and a paint.

Image

and a couple new seals, the inside of the fan shroud has a nice coating of oil.
no rust at least!

  • Like 8

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now