bigmatt4 Posted December 9, 2014 Author Share Posted December 9, 2014 modified the cheap shit coby extractors as they hit the floor changed from 4-1 to 4-2-1 not fussed on power loss/gain as i will attemps my own set later down the track. also rebiult the entire exhhaust system as i was not happy with the addition of handbrake cables. Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted December 9, 2014 Author Share Posted December 9, 2014 engine almost ready to fire up this weekend i hope. I have cranked it over and it has has oil pressure and all compressions sound fine . All i need is some ht leads top radiator hose and bit of wiring and fingers crossed its a good one. 7 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted December 12, 2014 Author Share Posted December 12, 2014 small amount of fiddling with the carbs and its alive 4 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted September 14, 2015 Author Share Posted September 14, 2015 Ok so been real slack on the updates but have a bit of progress but test fitted all panels and finished off the panelbeating 3 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted September 14, 2015 Author Share Posted September 14, 2015 Really happy with all the gaps and lines. Removed engine again and removed battery tray washer bottle actually everything deloomed brake lines moved to inside of car was supposed to be a legal thrasher but ive got a bit carried away haha and got some paint 3 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted September 14, 2015 Author Share Posted September 14, 2015 things are now moving ahead well got suspension in bought me sum new gaz adjustables for the rear everything going together as planned so far still short on a driveshaft for drivablity and crack testing for certs 4 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted December 2, 2015 Author Share Posted December 2, 2015 So after a couple of nights in the shed she now drives not 100% finished yet but close to cert time 4 Quote Link to comment Share on other sites More sharing options...
Popular Post bigmatt4 Posted December 2, 2015 Author Popular Post Share Posted December 2, 2015 It drives really nice apart from the diff whine very low geared 4.7 screams its head off but it loves it. almost got the tune sorted just trying to iron out a rich cruse and slight hesitation off idle but runs great. Suprisingly those lockrite diff lockers are quite streetable does u turns tight corners with no scuffing few clicks but locks well when wanted. just need to glue the rear windows in get me some handbrake cables made and new seatbelts and cert time everything passed crack testing too even the wheels so was stoked with that 12 Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted December 14, 2015 Author Share Posted December 14, 2015 sooo i had a couple and needed to test something for end of year workshop duties arm was twisted a little perhaps as well https://youtu.be/bbrxLWiaR8A 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.