grunta Posted March 29, 2011 Share Posted March 29, 2011 Discuss it here ah the day i got the vc , take a sweet wagon 5 hours north to pick up a sweet wagon!!! johns warrent city~ note sweet visor! ahhh wag nats! brake up grade pics to follow Quote Link to comment Share on other sites More sharing options...
grunta Posted August 21, 2013 Author Share Posted August 21, 2013 started poking around some bubbles in the tailgate ... turns out bog covers all!!! 9 Quote Link to comment Share on other sites More sharing options...
grunta Posted January 20, 2014 Author Share Posted January 20, 2014 Just had a great week/weekend for doing car work (the mrs was on call so was in garage at every opp) New rear brake lines check, new tranz mount check, A piller rust check, just need to weld a piece into tail gate and paint and its wof time!!! aslo got a factory heater switch last week so must be time to mount heater unit too! c ya all at Wag nats! 5 Quote Link to comment Share on other sites More sharing options...
grunta Posted January 22, 2014 Author Share Posted January 22, 2014 photo up date. good enough peice with joggle to weld in... 4 Quote Link to comment Share on other sites More sharing options...
grunta Posted January 23, 2014 Author Share Posted January 23, 2014 Who dosn't love a massive gaping hole! 5 Quote Link to comment Share on other sites More sharing options...
grunta Posted January 24, 2014 Author Share Posted January 24, 2014 tak tak tak , zzzzzzhh! 5 Quote Link to comment Share on other sites More sharing options...
grunta Posted January 27, 2014 Author Share Posted January 27, 2014 BOGDUP 7 Quote Link to comment Share on other sites More sharing options...
Popular Post grunta Posted January 28, 2014 Author Popular Post Share Posted January 28, 2014 looks good enough , now just gotta fit it without scratching paint! also i never wanna be a panel beater! 12 Quote Link to comment Share on other sites More sharing options...
grunta Posted November 10, 2015 Author Share Posted November 10, 2015 have been busy lately on wag , leaded up leaky radiator . alternator packed in so rebuilt it , was full of oil when i got it apart and turns out its the catch can for breather/ alternator fan sucks all oil vapor threw. didnt want this to happen again and also didnt want to fuck with the look of oil cap so here is what i did will put brass 3/8 bap - 1/2 " hose tail in and make a catch can out of a stainless drink bottle i have laying around at work 4 Quote Link to comment Share on other sites More sharing options...
grunta Posted November 10, 2015 Author Share Posted November 10, 2015 //oldschool.co.nz/index.php?/topic/29475-gruntas-67-vc-valiant/?hl=grunta link to discussion 1 Quote Link to comment Share on other sites More sharing options...
grunta Posted February 26, 2016 Author Share Posted February 26, 2016 Just dropped off some Vg steels to Halcrow engineering for 2" bands WooHOo! Also have uncovered some butchery, there is a false floor barely tacked and mostly gooed in over the origional floor pan which going to be replaced, seems weird someone would go to all the effort to fix it/ cover it up like that when fixing it properly wouldn't have taken alot more effort! also some fun time rust in sill left side and inside a piller . Pics to come 5 Quote Link to comment Share on other sites More sharing options...
grunta Posted March 17, 2016 Author Share Posted March 17, 2016 Recently I've rebuilt my steering box , had a "bolt in replacement" but the bolt holes were 1/2 " futher apart so must have been out or a different model. Anyway took out the internals from the not fucked new 1 and put them in origional housing with some new needle roller bearings and a seal... yae the sector shaft now dosn't move laterally 3 mm Now for sill rust , just 1 side , went on discovery adventure with angle grinder 1mm skim coat of bog dust through out garage Where they brazed on the Wagon to a sedan body can see old repairs stitched in front half of sill , hence all the bog The inside of the bottom of the A piller is also rusty , hopefully can replace it when i have the sill off... Floor pan still to come - turns out false floor (galv sheet metal) tacked in with pigeon shit over top of origional floor was a dumb idea from previous owner... not looking forward to what i find under it also need to figure out a good way to get the worlds supply of underseal off the underside... im thinking Liquid Nitrogen?? 5 Quote Link to comment Share on other sites More sharing options...
grunta Posted April 6, 2016 Author Share Posted April 6, 2016 rims back from halcrow , 2" bands woohoo! off to sand blasters ... the only question is should i paint black or bergundy??? 7 Quote Link to comment Share on other sites More sharing options...
grunta Posted April 26, 2016 Author Share Posted April 26, 2016 Picked up wheels from sand blaster today, so many runs to sand out of primer they put on...and a nice metalic something over spary all over all of them... but happy nonetheless here we have 6" hq rims x2 8" hq rims x 4 and 7" val rims 8 Quote Link to comment Share on other sites More sharing options...
Popular Post grunta Posted May 1, 2016 Author Popular Post Share Posted May 1, 2016 my first attempt at being a spray painter went better than expected! 15 Quote Link to comment Share on other sites More sharing options...
Popular Post grunta Posted May 3, 2016 Author Popular Post Share Posted May 3, 2016 11 Quote Link to comment Share on other sites More sharing options...
grunta Posted May 3, 2016 Author Share Posted May 3, 2016 on the car, but still jacked , had to take off the L/h hub and bring to work... pic with cap just cause i like em! 7 Quote Link to comment Share on other sites More sharing options...
Popular Post grunta Posted May 4, 2016 Author Popular Post Share Posted May 4, 2016 15 Quote Link to comment Share on other sites More sharing options...
Popular Post grunta Posted July 24, 2016 Author Popular Post Share Posted July 24, 2016 started on the sill rust , has a good productive thursday ( had the day off with no kids , grinding all morning then went to work and made some replacement panels) few tricky bits but shouldnt be too bad. this the bottom of the a piller, rusted out from the inside, looks bad but have a plan of how to weld new steel in this part will be welded in to bottom of a piller, made a cut in the bottom of part( the 200x40 cut ) so i can weld from under car (inner side of the inside of A pillar) and also from the inside of the car/foot well(to weld to outer of the inside of A pillar) then will patch the cut. 11 Quote Link to comment Share on other sites More sharing options...
grunta Posted July 31, 2016 Author Share Posted July 31, 2016 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.