f100_dreamin Posted June 30, 2019 Share Posted June 30, 2019 Also @Shakotom hurry up and bag the olds already Quote Link to comment Share on other sites More sharing options...
Evan Posted July 3, 2019 Share Posted July 3, 2019 What's everyone using for their air lines/fittings and how are they finding them for longevity/leakiness? Hard or soft lines? push to connect fittings? Swagelok fittings? duct tape? Paging @Nominal, @sheepers, @MRWEST, @_Matt Quote Link to comment Share on other sites More sharing options...
sheepers Posted July 3, 2019 Share Posted July 3, 2019 hello. most of the push lock fittings that i needed came with the kit but the other stuff i bought was SMC. all has been great so far. actually, the SMC push button spring return valve i bought to purge water out of the tank shit itself, but i suspect 150PSI with no back pressure on the exhaust side of the valve might have caused its demise. the air lines all came with the kit, the only bits i added was a nylon line from the compressor because the heat melted the stuff that came with the kit (i suspect its all PVC but not sure) and i ran the air lines that are exposed inside copper tube to protect them. everything is functioning fine so far. 1 Quote Link to comment Share on other sites More sharing options...
Nominal Posted July 3, 2019 Share Posted July 3, 2019 Mine's all done with 3/8 push lock fittings with truck air line. Some fittings are built into the accuair valve block, the rest I got from a truck bits supplier. There is a leak somewhere, but I haven't tried to find it./slack Won't hold pressure overnight. I like being able to remove the lines easily - helps when messing around/connecting certain parts to the garage air compressor. I only blew the line from the compressor once when the A/C clutch locked up and the pressure went to high. Put a coupler in there and it's been fine since. Be careful not to mix 10m with 3/8 line/fittings as they are not compatible. Quote Link to comment Share on other sites More sharing options...
_Matt Posted July 4, 2019 Share Posted July 4, 2019 I used all 1/2” valves and 1/2” x 1.4mm wall thickness aluminium tube for everything. The push to lock fittings seemed to work well with Ali tube and they haven’t started leaking yet. Only leaks I’ve had were from the 90° fittings that weren’t the swivel type, because they weren’t very tight, as I couldn’t get them pointing in the right direction. Also the water traps were leaking so took them out. Stays up overnight no problem now. The only other issues I have is the rear pops up way too quick with the 1/2” lines. Goes past ride height and then has to drop back down a bit. Goes too fast for it all to react and is uncomfortable. I did slide some 3/8” tube inside the 1/2” which made it a little less violent, but it could still be slowed down more. Front is perfect though. Also because I’m running the Accuair E -level, it monitors the ride height and updates it every minute or so. It started doing some wired stuff by dropping a corner randomly. Ended up disabling it and just pressing the ride height button when on flat ground to even it all out. Could of got away using a cheaper/simpler kit since I’ve now disabled most of its functions haha. 2 Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 4, 2019 Share Posted July 4, 2019 I need to look into all this lark for use in the Prince. Ain't no mother fucker going to be making a kit for that though so fuuu, moar work. Quote Link to comment Share on other sites More sharing options...
Spencer Posted July 4, 2019 Share Posted July 4, 2019 What is the suspension setup? hopefully wishbone front and coils on rear axle? if its leaves then its gay. Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 4, 2019 Share Posted July 4, 2019 Leaf sprung de-dion rear. Quote Link to comment Share on other sites More sharing options...
Nominal Posted July 4, 2019 Share Posted July 4, 2019 47 minutes ago, kyteler said: Leaf sprung de-dion rear. wow. Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 4, 2019 Share Posted July 4, 2019 10 minutes ago, Nominal said: wow. Yeeeeeeah. It'll be a cunt. Quote Link to comment Share on other sites More sharing options...
Spencer Posted July 4, 2019 Share Posted July 4, 2019 2 1 Quote Link to comment Share on other sites More sharing options...
f100_dreamin Posted July 8, 2019 Share Posted July 8, 2019 I used push lock fittings, and 1/2” truck brake airline. Works ok but it’s a bit of a pain in the fact that getting a tight radius is impossible. I have a few leaks at the tank where the brass fittings are in the tank. Used a liquid thread sealant (was told not to use tape) but unfortunately I still seem to have leaks there. One day I’ll get around to sorting them...... Quote Link to comment Share on other sites More sharing options...
Kimjon Posted July 12, 2019 Share Posted July 12, 2019 Has anyone tried an Ebay kit like this? https://www.ebay.com/itm/Air-Suspension-Kit-1-2-Valve-7-Switch-Pewter-1958-64-Chevy-Impala-5-Gal-xzx/162083897135?hash=item25bcf3ff2f:g:oxsAAOSwCQNWhEWn Under $1000 delivered to your door...almost to cheap to believe? 1 Quote Link to comment Share on other sites More sharing options...
Nominal Posted July 12, 2019 Share Posted July 12, 2019 Likely cheap for a reason "SPECIAL NOTE: NEGATIVE reviews stay on the web forever. Other companies come an go, or are brand new, giving the impression of no negatives. If we received 5 negatives a year for 30 years, we would have 150 negatives. DO THE MATH... Go to our EBAY store and find out the truth. We have a 98.8% Positive Customer Review Rating. We ship 800 items each and every day. Considering we have a 1.2% Negative rating, it translates to less than 1%. A competitor, shipping 10 items a day at 1% simply does not equate to 800 items a day at 1%. It is all in the math. How could we stay in business 30 years if we did not make our customers happy? Time in business is never considered when a Negative appears. Perhaps some brilliant programmer will figure it out some day and give the consumer the TRUE PICTURE" 1 Quote Link to comment Share on other sites More sharing options...
Yowzer Posted July 12, 2019 Share Posted July 12, 2019 That's quite a ramble about negative reviews. Tbh I'd give it a crack in a shitbox. Combine with a $1000 eBay turbo kit and you'll be away laughing, for maybe 2,000km. 1 1 Quote Link to comment Share on other sites More sharing options...
Kimjon Posted July 12, 2019 Share Posted July 12, 2019 Or maybe this one, looks slightly better quality? https://www.ebay.com/itm/Air-Suspension-Kit-3-8-Manifold-Shock-Relocater-1958-64-Chevy-Impala-5-Gal-xzx/163081886852?_trksid=p2504926.m5232.l9681 Tempted Quote Link to comment Share on other sites More sharing options...
Nominal Posted July 13, 2019 Share Posted July 13, 2019 I've been happy with my Accuair system with slam specialties bags - IIRC the bags were about NZ$250 each. 2 Quote Link to comment Share on other sites More sharing options...
cletus Posted July 13, 2019 Share Posted July 13, 2019 Looks like chassistech/airbag it.com They have been selling bottom of the barrel air bag stuff for a long time 1 Quote Link to comment Share on other sites More sharing options...
Kimjon Posted July 13, 2019 Share Posted July 13, 2019 25 minutes ago, cletus said: Looks like chassistech/airbag it.com They have been selling bottom of the barrel air bag stuff for a long time Would something like this be hard to cert? Quote Link to comment Share on other sites More sharing options...
cletus Posted July 13, 2019 Share Posted July 13, 2019 I havnt seen any of it in person so I dunno... I had a look at one last week that had china bags and valves and that was really throw it all in the bin and start again Most of the air suspension setups I have certed have had better quality parts, and self leveling systems The way the rules are written, it's very difficult to get a system to comply without a self level system 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.