sheepers Posted July 17, 2012 Share Posted July 17, 2012 Ive read through your threads and you do some amazing work, your vehicles are awesome bro. i am about to start pulling the engine out of my donor car for the swap into my te72 corolla and i am not the best about factory wiring, i can do standalones but im trying to retain the factory ecu as you did. do you have any advice as to what all i should pull when i pull the factory harness, do i need the lexus relays and fuse box? im just lost on that part and i cant find a write up anywhere. thank you for any advice. cheers man. as far as the wires go i reckon you will cause yourself more hassle than its worth trying to keep the fusebox and relays. you only need a few fuses and a few relays to get everything working on the motor. i reckon its easier and tidier using aftermarket stuff. there is a thread on her entitled "how to wire a 1uz" i haven't read it for a while but I'm sure you'll find some pretty useful information in there and its a good place to ask questions if you get stuck. if you've done re-wiring of a UZ before then you'll know they are pretty basic, the factory computer and loom isn't very complex. good luck with it man and get a build thread up so we can have a gawk at your project. sheepers. Quote Link to comment Share on other sites More sharing options...
hkp Posted July 17, 2012 Share Posted July 17, 2012 will do man, i will go look for that thread and start reading, i want to be driving this thing with some power, the stock 3tc is miserable. i was also wondering, not that it really matters but what kind of fuel economy you seeing? Quote Link to comment Share on other sites More sharing options...
sheepers Posted July 17, 2012 Share Posted July 17, 2012 with the link its pretty good, around 11l per hundy on the open road. anything up to 14 if you fang it around town. can't remember what it was doing with the stock computer but it was way worse. i really, really can't recommend the link G4 enough. its jut a different motor with the link. Quote Link to comment Share on other sites More sharing options...
Alistair Posted August 25, 2012 Share Posted August 25, 2012 You've reached the pinnacle of fame. What next Mad Dave? A career in D1's? Quote Link to comment Share on other sites More sharing options...
Poo Posted August 27, 2012 Share Posted August 27, 2012 I remember when Mr Sheepers DIDN'T own this! what is that dirty piece of blown head gasket doing in there. and Sheepers old Crown running an early link. Quote Link to comment Share on other sites More sharing options...
Evan Posted August 27, 2012 Share Posted August 27, 2012 hold up, whatever happened to that crown? I want it, I already know what to do with it. now give. Quote Link to comment Share on other sites More sharing options...
durty Posted August 27, 2012 Share Posted August 27, 2012 Sweet bonnet on that crown Quote Link to comment Share on other sites More sharing options...
kyteler Posted August 27, 2012 Share Posted August 27, 2012 Hah, why would you put a UZ in it if it had a 5MGE!?!!???? YOU CRAZEE SHEEPERS, YOU CRAZEEEEEEEEEEEEEEEY Quote Link to comment Share on other sites More sharing options...
Simon Posted August 27, 2012 Share Posted August 27, 2012 hahah yeah what the hell. ^ Quote Link to comment Share on other sites More sharing options...
Guest green76ra23 Posted April 7, 2013 Share Posted April 7, 2013 Hey sheepers. How is the supercharger coming along? Quote Link to comment Share on other sites More sharing options...
Guest sheepers Posted April 7, 2013 Share Posted April 7, 2013 hey man. not a lot happening with the supercharger. im making a manifold for it out of a solid billet at work and i have to wait until there is a machine free before i can work on it. ive roughed it out but there is still a few hours machining required yet. and to be honest im spending 130% of my time on the crown so i dont do much on it. its not dead though, far from it, it'll happen and you'll know when it does........... Quote Link to comment Share on other sites More sharing options...
Spencer Posted January 13, 2014 Share Posted January 13, 2014 Looks like you need a glide as well. 3 Quote Link to comment Share on other sites More sharing options...
Vintage Grumble Posted January 13, 2014 Share Posted January 13, 2014 When'd you get a chin spoiler for it? I'm so out of touch these days. Quote Link to comment Share on other sites More sharing options...
Testament Posted January 13, 2014 Share Posted January 13, 2014 I'd settle for a Toyoglide Quote Link to comment Share on other sites More sharing options...
Willdat? Posted January 16, 2014 Share Posted January 16, 2014 Cheers for the in depth post Sheepers. It's been easy to look at some of your work and just assume you're a god/it all goes together in 2 minutes. Love your work. Quote Link to comment Share on other sites More sharing options...
cletus Posted August 24, 2014 Share Posted August 24, 2014 well done on the whittling, goodness me thats a nice looking chunk of alooominum Quote Link to comment Share on other sites More sharing options...
anglia4 Posted August 24, 2014 Share Posted August 24, 2014 Fucking wow. Quote Link to comment Share on other sites More sharing options...
sheepers Posted August 24, 2014 Share Posted August 24, 2014 thanks guys. still got a bit to do before i strap this thing on the v8 and do a skid but its a big milestone. Quote Link to comment Share on other sites More sharing options...
peteretep Posted August 24, 2014 Share Posted August 24, 2014 any idea on the time taken to machine that? its awesome Quote Link to comment Share on other sites More sharing options...
Chris.QCR Posted August 24, 2014 Share Posted August 24, 2014 That's outstanding mate!! Can't wait to see it all together Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.