Testament Posted June 8, 2021 Share Posted June 8, 2021 probably thought of all these things already but the usual things from industrial machinery issues bent output shaft whirling around damaging seal (seems unlikely with no vibes) undersize output shaft OD for seal (pretty unlikely with new from toyota but not impossible) tailhousing bush not aligned with output shaft inner bearing so shaft is not central to seal bore axial movement of shaft in operation resulting in wrong diameter bit of shaft running on seal any seal marks/wear on the shaft? 2 Quote Link to comment Share on other sites More sharing options...
Roman Posted June 27, 2021 Share Posted June 27, 2021 Good stuff Sheepers, I fucking love scope creep 1 Quote Link to comment Share on other sites More sharing options...
Lith Posted July 14, 2021 Share Posted July 14, 2021 Poor old Hypergear definitely earned its keep trying to feed the 2JZ! Be interesting to see how the G30 goes on it! Quote Link to comment Share on other sites More sharing options...
sheepers Posted July 14, 2021 Share Posted July 14, 2021 Yea the little hypergear has had a hard life. But onwards! I'm really hoping for a broader earlier torque curve. We shall see..... Quote Link to comment Share on other sites More sharing options...
yetchh Posted August 6, 2021 Share Posted August 6, 2021 Jesus... 1 Quote Link to comment Share on other sites More sharing options...
kyteler Posted August 6, 2021 Share Posted August 6, 2021 Foive hunnid horse in the little blighter. Cripes. That'll have you taking bites out of the base of your seat for a few weeks 1 Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted August 6, 2021 Share Posted August 6, 2021 Do A Skid Cunt....... 1 Quote Link to comment Share on other sites More sharing options...
sheepers Posted August 6, 2021 Share Posted August 6, 2021 54 minutes ago, kyteler said: Foive hunnid horse in the little blighter. Cripes. That'll have you taking bites out of the base of your seat for a few weeks It's 600 but who's counting..... 4 Quote Link to comment Share on other sites More sharing options...
kyteler Posted August 6, 2021 Share Posted August 6, 2021 Casual what, ten times more than factory? Quote Link to comment Share on other sites More sharing options...
sheepers Posted August 6, 2021 Share Posted August 6, 2021 Yea Probably. I unno. I do know that she's gonna be a hand full I tell you what 2 Quote Link to comment Share on other sites More sharing options...
cletus Posted August 6, 2021 Share Posted August 6, 2021 1 hour ago, sheepers said: It's 600 but who's counting..... 616 plus driveline losses is like 700 at the engine?! Goodness me David, you are going to foul your underwear if you depress the accelerator fully! 1 Quote Link to comment Share on other sites More sharing options...
sheepers Posted August 6, 2021 Share Posted August 6, 2021 fouling underwear is a given i think sir. and ill foul them with glee as i attempt a full depression of the accelitratornix i tell you now! 4 Quote Link to comment Share on other sites More sharing options...
tortron Posted August 6, 2021 Share Posted August 6, 2021 Seems like a lot of words to say, do a skid 1 Quote Link to comment Share on other sites More sharing options...
Lith Posted August 6, 2021 Share Posted August 6, 2021 That is an excellent result sir! Impressed with the spool especially, wasn't sure if it was going to be able to push out to the left. As is obvious to all, that's gonna be a terrifying and hilarious experience to drive 1 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted August 6, 2021 Share Posted August 6, 2021 wow! So the axle torque of circa 2000lbft- what's the equation to convert that back to engine torque? Quote Link to comment Share on other sites More sharing options...
sheepers Posted August 7, 2021 Share Posted August 7, 2021 its about 610 ftlb at the wheels. Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted August 7, 2021 Share Posted August 7, 2021 Cool. A totally suitable amount then 1 Quote Link to comment Share on other sites More sharing options...
anglia4 Posted August 9, 2021 Share Posted August 9, 2021 Bloody hell. Have no trouble towing the boat with that kind of torque. Quote Link to comment Share on other sites More sharing options...
Abarth Posted September 28, 2021 Share Posted September 28, 2021 Keen to hear the improvement from the intercooler upgrade, heard good things about the Plazmaman intercoolers Quote Link to comment Share on other sites More sharing options...
sheepers Posted September 28, 2021 Share Posted September 28, 2021 yea me too. ive got the last pieces of the puzzle on the way then itll go back on the dyno for a quick tickle and ill see what difference it makes. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.