Sunbeam Posted October 30, 2020 Share Posted October 30, 2020 2 hours ago, zep said: With a turbo on an engine designed in 1980? Hurhur. Missed the turbo bit...have to read from the beginning again! Quote Link to comment Share on other sites More sharing options...
zep Posted November 1, 2020 Share Posted November 1, 2020 On 30/10/2020 at 15:46, Sunbeam said: Hurhur. Missed the turbo bit...have to read from the beginning again! I probably haven;'t really addressed it. But it is a similar build to the g-series I had in there before. It's just a slightly more modern (barely) engine. Saying that, there is at least one dude in Aussie with a 10.5:1 comp g-series running 35psi or something. So it is doable. 1 Quote Link to comment Share on other sites More sharing options...
johnnyfive Posted May 20, 2021 Share Posted May 20, 2021 Man its great to see vehicles like this still getting love, and with the same owner as way back when 5 Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted May 22, 2021 Share Posted May 22, 2021 I've read some uncomplimentry things online about maxspeedingrods. Defo go for the spools. Quote Link to comment Share on other sites More sharing options...
zep Posted May 23, 2021 Share Posted May 23, 2021 3 hours ago, RUNAMUCK said: I've read some uncomplimentry things online about maxspeedingrods. Defo go for the spools. Thanks for the tip. I'll do a bit of reading. 1 Quote Link to comment Share on other sites More sharing options...
kpr Posted May 23, 2021 Share Posted May 23, 2021 I've got some maxchina rods here. because youtube deals.        haven't measured them up yet. but they look all good and weigh all the same within .05grams.    they do have the usual china finish lacking attention to detail. like after they have machined the big ends to size, there is little burs left in the slots where the bearings sit etc..  nothing that a little hand finishing wont tidy up tho.     1 Quote Link to comment Share on other sites More sharing options...
zep Posted May 23, 2021 Share Posted May 23, 2021 14 hours ago, kpr said: I've got some maxchina rods here. because youtube deals.        haven't measured them up yet. but they look all good and weigh all the same within .05grams.    they do have the usual china finish lacking attention to detail. like after they have machined the big ends to size, there is little burs left in the slots where the bearings sit etc..  nothing that a little hand finishing wont tidy up tho.     Maxspeeding rods are $325 on eBay, versus $490AUD for Spool rods. I'm kinda leaning towards Spool as at least they will have proper support if something is a bit funky. Quote Link to comment Share on other sites More sharing options...
kpr Posted May 24, 2021 Share Posted May 24, 2021 Try garage4age discount code on the maxpeeding site. Not trying to be there salesman but maybe worth a look if it makes them cheaper Quote Link to comment Share on other sites More sharing options...
Dudley Posted May 24, 2021 Share Posted May 24, 2021 1 hour ago, kpr said: Try garage4age discount code on the maxpeeding site. Not trying to be there salesman but maybe worth a look if it makes them cheaper This guy getting that commission or something aye? 3 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted September 7, 2021 Share Posted September 7, 2021 Light surrounds look amazing! Ditto the plenum. Please tell me more about that gearbox speedo cable adaptor/sensor. What size thread is it, where did you get it ? 1 Quote Link to comment Share on other sites More sharing options...
zep Posted September 7, 2021 Share Posted September 7, 2021 1 hour ago, yoeddynz said: Light surrounds look amazing! Ditto the plenum. Please tell me more about that gearbox speedo cable adaptor/sensor. What size thread is it, where did you get it ? Hey Alex, I got it direct from Brantz in the UK. It literally just sits in between the gearbox and the cable, and is supplied with a little pin so everything still works. Mine is M22 ("Japanese" gearbox), but they have others - https://www.brantz.co.uk/sensors 2 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted September 7, 2021 Share Posted September 7, 2021 do you know what sort of 'flavor' pulse comes out of it? it might be an easy way to reinstate cruise control on the crown. my auto gearbox had a hall sensor which read 4 pulses per revolution on the output shaft. but the manual trans has no such provisions. 1 Quote Link to comment Share on other sites More sharing options...
zep Posted September 7, 2021 Share Posted September 7, 2021 1 hour ago, BlownCorona said: do you know what sort of 'flavor' pulse comes out of it? it might be an easy way to reinstate cruise control on the crown. my auto gearbox had a hall sensor which read 4 pulses per revolution on the output shaft. but the manual trans has no such provisions. Strangely enough the Brantz site doesn't say, but this reseller does: https://ears.ie/brantz-japanese-m22-gearbox-sensor/ 4 per revolution, which seems like it'd work perfectly for you! 1 1 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted September 7, 2021 Share Posted September 7, 2021 yeah had a poke around their site and couldnt see.  thats excellent news! thanks very much, i think ill buy two and have both the digital dash pack and oem speedo function in the corona too. Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted September 8, 2021 Share Posted September 8, 2021 Hmmmmmmmm? .... One could link up several in a row and have all of the pulses for so many toys. Or could that get messy?  2 Quote Link to comment Share on other sites More sharing options...
ajg193 Posted November 20, 2021 Share Posted November 20, 2021 On 08/09/2021 at 11:06, BlownCorona said: yeah had a poke around their site and couldnt see.  thats excellent news! thanks very much, i think ill buy two and have both the digital dash pack and oem speedo function in the corona too. Did anyone buy any of these? Brantz uk website doesn't want to ship to NZ and the ireland one wants like 64 euro for shipping. Quote Link to comment Share on other sites More sharing options...
Corbie Posted November 20, 2021 Share Posted November 20, 2021 1 hour ago, ajg193 said: Did anyone buy any of these? Brantz uk website doesn't want to ship to NZ and the ireland one wants like 64 euro for shipping. Looked at youshop for shipping? would be NZD$30-40 I would say Quote Link to comment Share on other sites More sharing options...
zep Posted November 20, 2021 Share Posted November 20, 2021 7 hours ago, ajg193 said: Did anyone buy any of these? Brantz uk website doesn't want to ship to NZ and the ireland one wants like 64 euro for shipping. I bought mine from Brantz UK. You couldn't buy directly from their site, they had to email me a payment link. You could also try and buy through brantz.co.nz Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted November 23, 2021 Share Posted November 23, 2021 On 20/11/2021 at 14:33, ajg193 said: Did anyone buy any of these? Brantz uk website doesn't want to ship to NZ and the ireland one wants like 64 euro for shipping. because of freight costs i havnt ordered yet, but perhaps we could combine? Quote Link to comment Share on other sites More sharing options...
zep Posted November 23, 2021 Share Posted November 23, 2021 This is what I paid: 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.