ul9601 Posted January 18, 2020 Share Posted January 18, 2020 I got failed on headlights being selective yellow (gotta have yellow on French cars eh) - virm says it's gotta be substantially white or amber. I had spare bulbs anyway so I swapped out rather than arguing about. Quote Link to comment Share on other sites More sharing options...
Mof Posted January 18, 2020 Share Posted January 18, 2020 I painted the underside of the van no worries, was green though. Also, pics of female friend 2 1 Quote Link to comment Share on other sites More sharing options...
Popular Post MightyJoe Posted January 18, 2020 Popular Post Share Posted January 18, 2020 18 3 Quote Link to comment Share on other sites More sharing options...
tortron Posted January 18, 2020 Share Posted January 18, 2020 I did underside of Morris all black, and brakes and suspension guy kept saying wow someone’s run new brake lines under there! Did you know! Never seen someone do that!!!! he was a Barry tho, no mention of welds on chassis tho 2 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted January 19, 2020 Share Posted January 19, 2020 Where can I find tyre manufacturers specs for maximum width allowed? Have tried google but no luck. Looking for a 195/65/14 that's allowed on a 7.5" rim Quote Link to comment Share on other sites More sharing options...
Beaver Posted January 19, 2020 Share Posted January 19, 2020 They are often listed on the manufactures sites (eg found them for toyo in 30 seconds) . Doubt you will find a one stop shop for all tyres though, so need to do some digging. 1 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted January 19, 2020 Share Posted January 19, 2020 40 minutes ago, Beaver said: They are often listed on the manufactures sites (eg found them for toyo in 30 seconds) . Doubt you will find a one stop shop for all tyres though, so need to do some digging. They arent on toyo site for 14" Quote Link to comment Share on other sites More sharing options...
fuel Posted January 20, 2020 Share Posted January 20, 2020 On 13/01/2020 at 16:35, cletus said: Correct, any change to the brake system needs cert So if you do an auto to manual conversion but leave the original auto brake pedal in place (assuming it clears clutch pedal), then it wont need a cert? 2 Quote Link to comment Share on other sites More sharing options...
Bling Posted January 20, 2020 Share Posted January 20, 2020 6 hours ago, dspec_tt131 said: They arent on toyo site for 14" Probably don't make that size then? 14" tyre options are pretty shit in general when looking at 7.5". Especially in odd ball sizes and if wanting something decent. https://www.falken.com.au/tyres/ you can select the tyre, then it lists sizes available and rim width compatibility. I imagine they all have similar setups. Odds are pretty slim though, as they probably don't test 14x7.5" rims often if at all. Basically why I ended up going with 15's, my 14x7.5's were a ballache to make work. Quote Link to comment Share on other sites More sharing options...
kicker Posted January 20, 2020 Share Posted January 20, 2020 17 minutes ago, fuel said: So if you do an auto to manual conversion but leave the original auto brake pedal in place (assuming it clears clutch pedal), then it wont need a cert? That's what I was told when talking to a cert guy many years ago. Not sure if that is the general consensus. Quote Link to comment Share on other sites More sharing options...
cletus Posted January 20, 2020 Share Posted January 20, 2020 1 hour ago, fuel said: So if you do an auto to manual conversion but leave the original auto brake pedal in place (assuming it clears clutch pedal), then it wont need a cert? Yes as long as it meets all the other requirements in the virm threshold, and the pedals had enough clearance to not cause issues 1 1 Quote Link to comment Share on other sites More sharing options...
187inc Posted January 20, 2020 Share Posted January 20, 2020 Hey guys, I apologise if this has been asked/answered a million times.. Asking on behalf of a friend who has just bought a car. Its certed for lowering and larger than factory wheels, the wheels are munted and he's thinking about buying some of the factory wheels as they are cheap and plentiful. Will this be an issue cone Wof time? Can you prove that they are factory diameter/width/offset and avoid having to re-plate? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
cletus Posted January 20, 2020 Share Posted January 20, 2020 Will need a new plate for the factory wheels. 1 1 Quote Link to comment Share on other sites More sharing options...
spiderwebfx Posted January 21, 2020 Share Posted January 21, 2020 On 20/01/2020 at 08:56, dspec_tt131 said: Where can I find tyre manufacturers specs for maximum width allowed? Have tried google but no luck. Looking for a 195/65/14 that's allowed on a 7.5" rim The range on the LVVTA guide includes the maximum and minimum of the major tyre brands. I.e. If Hankook had a 195/65R14 good for 5" to 6.5" but then Toyo has 5.5" to 7" the range allowed would be 5" to 7" (Example only) Falken were the only brand to have there product range outside of the normal specs from other brands, but they've since reigned that in and are now on par with everyone else. Unfortunately you're best bet is to go to a 205/60R14. 1 Quote Link to comment Share on other sites More sharing options...
HornySeaCow Posted January 21, 2020 Share Posted January 21, 2020 I recently revived my fx corolla swapping a redtop 4age into it, the original motor was a 5a-fhe 1500cc. I was wondering if there will be any issues getting a wof?, i know that these cars came out with 4ages and i think the power dfifference is only like 15hp (Also drives much the same), even bolted onto factory g/box, Will i need a cert or is it alg? Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted January 21, 2020 Share Posted January 21, 2020 1 hour ago, spiderwebfx said: The range on the LVVTA guide includes the maximum and minimum of the major tyre brands. I.e. If Hankook had a 195/65R14 good for 5" to 6.5" but then Toyo has 5.5" to 7" the range allowed would be 5" to 7" (Example only) Falken were the only brand to have there product range outside of the normal specs from other brands, but they've since reigned that in and are now on par with everyone else. Unfortunately you're best bet is to go to a 205/60R14. I have 205/60 but it's too bulge. Will try different offset wheels instead. Quote Link to comment Share on other sites More sharing options...
spiderwebfx Posted January 21, 2020 Share Posted January 21, 2020 46 minutes ago, dspec_tt131 said: I have 205/60 but it's too bulge. Will try different offset wheels instead. Ah right, the only 195 that can go on a 7.5" rim is the 195/45R14 which Falken do bring into NZ. That's a huge height drop though. Quote Link to comment Share on other sites More sharing options...
kws Posted January 21, 2020 Share Posted January 21, 2020 1 hour ago, HornySeaCow said: I recently revived my fx corolla swapping a redtop 4age into it, the original motor was a 5a-fhe 1500cc. I was wondering if there will be any issues getting a wof?, i know that these cars came out with 4ages and i think the power dfifference is only like 15hp (Also drives much the same), even bolted onto factory g/box, Will i need a cert or is it alg? Cert needed. 1 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted January 21, 2020 Share Posted January 21, 2020 17 minutes ago, spiderwebfx said: Ah right, the only 195 that can go on a 7.5" rim is the 195/45R14 which Falken do bring into NZ. That's a huge height drop though. Yeah I'm going for max height for ground clearance. Those 195/45 are tiny!!! Quote Link to comment Share on other sites More sharing options...
Yowzer Posted January 21, 2020 Share Posted January 21, 2020 1 hour ago, dspec_tt131 said: I have 205/60 but it's too bulge. Will try different offset wheels instead. I have seen different brand tyres (cannot recall the brands sorry) that despite being the same printed size, one had flat sidewalls, one looked like it was running mega stretch, when mounted to the same rim. These were some low pro 19"s though, probably don't have that particular faux stretch style available in a size as small as you want. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.