ex lancer wat!

Is a Manuel and automatic starter motor interchangeable on a 4k ke70.

think autoline is my best bet. i used to work at repco and theres nothing so i doubt bnt will have and definitely not supercheap

Hey team. Wanting to know if anyone on here has replaced the bushes in a rear end for a ex lancer as I cant seem to find aftermarket ones. If you have any ideas or part numbers please pm me thanks andy

hi my ke70 lowbeams are not working. the high beams still work fine. the fuses are fine and bulbs are fine. what else could it be. has anyone else struck this problem. thanks andy

yes its a 4 puk with heavy duty pressure plate. would anyone know the measurement of how far the release bearing needs to press into the pressure plate for the clutch to disinguage

i am installing a willwood pulltype slave cylinder into my car. it recommends a 3/4 master cylinder and i already have a 5/8 master installed. this means i will be underpowering the slave cylinder. does anyone know what the affects of underpowering the slave will be, will the pedal be softer and will the piston get less stroke?

i have a ex lancer and it is low but will be going lower. it will be running approx 350hp ATW. im deciding if i run a two piece dshaft or single piece. what are the advantages and disadvantages bearing in mind the low height of the car and the power it will be running

Hey man they look like factory turbo rear brake pads correct? Iv got the trw part number if u like. I used to work at repco so I looked hard for this part number in old books etc I'll get it again tomorrow as I know there are still some available in nz

Is there a trick to pushing the piston back? Won't really retract for me is there a special tool as I read with some caliapers the piston turns on a thread so you need a special tool. Is this the case for me or the cars just old and full of head aches

Is there a trick to pushing the piston back? Won't really retract for me is there a special tool as I read with some caliapers the piston turns on a thread so you need a special tool. Is this the case for me or the cars just old and full of head aches

That would be pads are fuel? I got pads sorted now need rotors

i know people have had trouble finding the pads to suite aswell but iv tracked the trw part numbers for those down so sing out if you would like them posted on here

wanting to replace my brake rotors in my 1800 gsr lancer 1982 but im having trouble finding part numbers can anyone help. (wanting to replace front and rear) somebody must know

Sweet all is in and looks pretty cool

So I'm guessing when you say 1600 sigma ones are same as ex arms that this means they will look identical to each other and not be the bolt in type