-
Posts
4153 -
Joined
-
Last visited
Posts posted by Evan
-
-
You’ve got to go get this now.
- 6
- 1
-
On 02/10/2020 at 07:26, oldrx7 said:
Yeh their response is good to hear.
Although it sounds like a few cars have been stolen from that wharf over the years - a few people were commenting with stories including - @R100 had an 808 taken many years ago never to be seen again.
Speaking of @R100 I think there must be an update coming for his RX5 thread based on photos posted on Facebook?
-
This will be a litmus test for the market
https://www.trademe.co.nz/a/motors/cars/mazda/rx7/listing/2791027587?bof=jumBACrp
- 1
-
6 minutes ago, nzstato said:
Deets on what "doing it properly" is going to mean for you?
12a bridgy, modgies, supertrapp
- 7
-
-
I have re003s on my daily (07 GT legacy wag) and I rate them, would trade again.
- 1
-
Yeah going over epoxy. There’s a very slight wavey-ness in the panels where the replacement piece has been welded in (read: lower door skins, lower section of rear 3/4s) need something to try and smooth that out so seeing what people have had success with.
not sure where you draw the line between between high build primer/polyester filler/bog/paper mache?
-
12 minutes ago, Spencer said:
Pretty much get everything from protec? I used their high build urethane a bunch of times for blocking, you can mix it as high build or as a regular thin coat. They are basically the cheap brand but still sell legit automotive paint systems.
Was waiting for you to chime in with Protec haha, got a link for which type/model number specifically? Catalogue List seems to be as long as your arm..
-
Anyone got any high build primer recommendations?
-
-
-
1 hour ago, kiwi808 said:
I wonder how many years will pass before we all think that 50 was a steal?
At the start of the thread a good 3 coupe was sub 30...
Give it until xmas, a good 3 coupe will probably be sub 30 again...
- 4
-
When I looked into it ~5 years ago I only found 3 types of 15in tyres that were manufacturer rated for a 10in wide rim, there's the Pirellis(?) that go on the back of a Countach/ 930 Turbo. some other high sidewall tyre and the only low profile tyre I could find was the Avon Semi slicks that go on the back of the fancy pants Caterham - these were $500/piece from memory.
just a side note if you care.
- 1
-
-
-
@Roman please DIY some superaccurate thermostat controlled oven that has ramp control.
Post PowerPoint slideshow displaying results pls.
- 2
-
Nah mate.
SA > JC > FD > HB > FC
bite me
-
Good.
- 1
-
Thaaaaaats something I didn’t need to see
-
I want another series 1 rx7
- 3
-
Autoblast from memory are $275+ GST/ hr. I got a text from them last month saying they were doing 15% off their rustproofing system for the month of March, if you go that way might be worth asking if they’ll still honour that.
- 1
-
Just now, yoeddynz said:
Just a note- they are a stones throw away from the estuary.
Does not bode well..
I might have to go back and do some digging about that truck. Its still in the system although I presume the rego is lapsed.
Reg on hold until 13/08/2020 according to nzta site
- 4
-
Must be time for a zero to be removed from the price tag of these cars
- 4
-
Yoeddynz's 1985 Hino N0915 housetruck build.
in Project Discussion
Posted
International T2670