1vaknd

Looking for a flatmate as stated. Old flatemate is moving out due to finding a girlfriend. And due to his lack of cleanliness. Is a four bedroom house located in Mt Wellington. And is about 5 mins away from Ellerslie and sylviapark. Asking $160/week that in closes expenses( my sky, power, water, phone & wireless, Internet) this is for a decent sized room also(4.3x3.6 from memory). Pm me if interested Cheers Wez

Got front of gaurs all mocked up nowan back attached properly. Harder part is trying to get wheel clearance on turn in.( doesn't make it easier having camber fully wound up) but will give me enough clearance to be at max castor if neccesary.(probably not) Will be leaving a vent next to end cap as it would look reali weird if it was boxed up

yeah would of been but wasnt keen on 180-250 each gaurd

are you sure about that haha think about what you just said lol

four front gaurds and a bit of modifying and wahlah. something different Desire To Be Different

you got it =)

no and no and it had a cut in the gaurd for a gap at the back between the door

guess what they are off of?

the gaurds?

a little bit of widebody-ness

=)

Widest tyre I found for 15" wast 235 r888 max fitment is 8.5" dut could easily stretch onto 11" an still look safe

Have done a massive photo dump on facebook (Oneofakind toybaru) Off to panel beaters today so shal be interesting to see it all come together.

There's alot to it dude! Don't attempt unless you are good at overhead welds( or have rotisserie ) pm me when you are going to start it and I can give you the full run down. It is not as easy as just drilling holes and bolting it up, I'm warning you!

Anyone have a spare ej20t starter motor lying around? Mine seems to have gown legs. Preferably 1990 model Gt or rs!

Cheers dude I didn think that one would work

Most of my updates will be via facebook from now on dudes . Way easier than trying to keep track of multiple websites. Here's a link and if that don't work then just search Oneofakind toybaru http://m.facebook.com/?w2m&_rdr#!/profile.php?refid=7

Sweet dude. Not a fan of rain haha an nether is the kp. Got the answer I was after so see you tonight.

What about moving to sylvia park for the wetter nights plenty of lighting for mean photography, super dry, walking distance same as current location to burger fuel and garisons is across the walkway also. Just an idea.

Tose centre arm are parallel with the chasis rail as it is dude. Hey didn't you have problems with your mounts beaking free from the chasis

Look closer in the pics above. The rack is held in with cable ties at the moment. Have to tak a notch out of cross member on drivers side bracket to square it up. Also castor arm brackets arent bolted down in those pics so nothing will be lined up properly

On??? Up and down movement?

Easier and stronger to weld bottom link bracket to the chasis rail I can get four 5mm welds on there nicely plus the extra welds on floor pan. I have seen way to many cars breaking these link brackets. Throughout this whole build my main motto is do it once do it right. I know it's enevitable that I will always have to do more work later on down the track but I want this to be mainly maintenance free when finished!

It is sex lol. I love it too haha

okay heres some better qaulity photos for yas all. rear four link is all mocked up and ready to be wellded up. have all my bolts and brackets sorted for watts link, will go in and order arms tommorow. frony hubs and rear axels have been turned down to fit rotors. brakes have been finalized. series 6 rx7 rotor up front with the subaru 4 pots, and series 4 rx7 rotors on the rear running factory calipers with internal handbrake and brembo 2 pots for hydraulic hand brake. brakes are running off 2 5/8 mastercylinders on brake pedal under the dash, 1 for front 1 for rear. cluth will be the same under the dash. have modified steering collumn to suit subaru stuff. have up and down adjustment on steering wheel and run suby indicator cluster. more adjustment on windo wiper