Jump to content

MACKAZ

Members
  • Posts

    3529
  • Joined

  • Last visited

Everything posted by MACKAZ

  1. About to turn around and strip the tins a 3rd time. It’s going to get a satin black paint job from left over tins from work.
  2. Did you do anything regarding upgrade to the valve springs? I had one with a cam and a little head work in it in my first stockcar and they were the built in rev limiter at around 7500rpm. You probably know this but pay attention to the oil pump drive. They’re a great little motor apart from those two things
  3. Must be time again gents….someone pick a date and time…I’m in Melbourne again late this month
  4. Yeah. I wanna stay with the yellow. I’m just gonna run the base coat and wax the shit out of it. Back guard also frittered so that’s a strip as well.
  5. I am soooo Fricking tempted to go get two tins of Matt black and be done with it. Dont buy Rustoleum paint
  6. For fucks sakes. Supposedly compatible. Same brand same everything. CUNT
  7. FYI there is now a Northland OS Facebook page. I’ve invited everyone I can think of so if I’ve missed anyone give me a holler. This was permitted with consultation with El Presidente
  8. Back guard still needs a bit of love
  9. It’s yellow. Still needing clear
  10. Pictureless update due to being angry at myself. Had tank and front guard in top coat and had sanded the couple of small runs out. Gave it a wipe down with a rag and some prepsol. Let it dry and started putting on the (what I thought would be) topcoat before the clear. Finished up and left them in the sun. Went back half an hour later and the frigging lot has reacted. Turns out this Rustoleum paint doesn’t like prepsol. FUCK IT ALL. so front guard has been ripped back to bare steel again. Tank tomorrow. Faaaaaarrrrrrrrkkkkkkk it all
  11. Lol. It was a decision made between me, wife and daughter. I was absolutely done and lucid at the time
  12. Bought paint yesterday. It’s bright. YELLOW. Throwback to my old days where my first 2 bike were yellow. I think it will look okay
  13. Aaaaannnnddddd I’ve just been thrown a curveball. Wife has decided that the blue is too much. Back to Bunnings in the morning…..Hhmmmm.
  14. Have applied a fair amount of etch primer to the tins. Guide coat on tank/front guard. The tedious task of 400 wet n dry starts tomorrow. We decided on a colour and bought it. I am going to paint it with rattle cans and it is not going to be orange. It’s going to be a light blue with the original badging on the tank. Should be different
  15. And the chapter of boat ownership has come to an end. Collected yesterday and actually made a small profit from it. If all goes well and to plan I’ll continue this thread with something completely different watch this space
  16. That’s enough for tonight I’ll do rest with stripper wheel tomorrow night
  17. Just a plain solid colour. Not metallic or anything crazy. Just needs to be brighter than the black/green. I’m thinking orange but jury is still deliberating
  18. Back guard 99% stripped Front guard with stripper and cling film attached Tank should arrive from Katikati on Thursday with all things going to plan
×
×
  • Create New...