mk2 gt

bit of a tidy up for the 4nr nats

just thought i would share a pic of how the engine bay is coming along slowly a few more things i want to tidy up and do i.e polish the rocker cover

today was an accomplishment thanks to rich(snoozn) and retep180 (pete) and massive thanks you you guys! fitted some bigger jets he had laying round and they made a big difference it runs and drives alot better, found where the squeak was being generated from also just need to to a couple of other minor things which should sort it completely *touch wood*

ah ok will give it ago i can get my hand on a gauge i can stick on the end of each carb and adjust to suit similar to this

i dont have vacuum points on each runner

fuel leak sorted thank god runs funny so just need balancing i think have to start on the choke so ill rig one of them up at some stage too

fuel leak fixed! runs a bit funny but didnt warm her right up will have a crack at balancing them in the new year

only bought the parts to help stop the fuel spitting out the vents as a couple of the needles were touch and go, shaneo i might hit you up for the carb balancer in the new year once i sort the over fueling issue

cheers, i have ordered new float needles etc so ill replace them for piece of mind that should rectify the over fueling problem *touch wood*

next step is to strip and clean everything

well i fitted this even turned pressure down to 1 psi and fuel was still pissing out these 2 vents maybe carbs need a freshen up?

Went around to alert motorsport and picked up some fittings for fuel reg. So ill chuck that on tonight and see how it goes

another question the fuel reg i have here doesn't have a fuel return line? do i need to run one of this carb setup with mechanical pump or will it be find without it? what have others done?

haha yeah thats my thoughts to... cant really take it to either or as they will just look at me sideways

its lowered on cobra springs with custom made bilstein rear shocks and shortened front housings with monroe inserts to retain travel at ride height (im too lazy to make bilstein inserts for the front )