10Speed

I dunno but those cylinders look a bit small...

store it in the cloud?

Nissan Elgrand 3.5 a 350z in van form

^exactly wheel choice is for pussies

The absolute cheapest option is about $1900AUD, obviously, you'll need a Subaru gearbox (my donor box cost me about $450), about 5hrs labour on top and also fabricate some mounts yourself.  But at the end of that, you end up with a stronger box and 5 gears to choose from.

Needed to test fitment in project car, could be in any condition at all only needed for a day or so.

Have beers etc.

Dave

ready for that subagears buy whenever you are 

I suspect I left mine in the sun prior (but to be honest it was so long ago I might be imagining it).  Also, when you do get them on the window, make sure the corners aren't stretched too tight/thin or the outside of the rubber won't sit on the body.

And finally be glad you're not dealing with the extra work the chrome brings

a squirt of silicon lube helped when I did my window glass.  You doing Cal-look rubbers?  or with chrome?

cheers, will look up the sizes of those.  Time for me to buy one as well....

Are you running a coolant header tank in the back? (I really should just come and have a look at it one day)

what radiator are you using?

though you know they're IRS only?

yeah sounds like a plan :_)

(also on my to do list)

or straight from the source in Sydney? https://www.facebook.com/Subarugears/

I have a beetle that can be there around that time...

keen, if there's not already a waiting list?

I just set up retro pie on a pi, let me know if you want a well populated sd card image...

Amazing!!!

btw CSP have a bracket to mount the brake res. inside the boot

https://www.coolairvw.co.uk/Image/0/0/JPG/CSP601021.jpeg

https://vwparts.aircooled.net/mobile/Product.aspx?ProductCode=401498

these were the cheapest 0 offset I could find, but you can't use them with drop spindles

what are your plans for the front end?  add lots of narrow & discs?

bugger was hoping it was the digital one and I would be able to take a copy of the CD

very envious of your case

and is that a magnaspark on the Taipan?

tonight I changed my spark plugs WITH THE ENGINE IN THE CAR!!!

(I also drew up some flanges and covers that are getting water jetted)

Somwhere around the  compressor housing should be ok.  pointing up.   You dont want it too close to the turbo outlet. as maybe a bit hot.   Also not too close to the end  as will get bad readings,  is that a slip joint where that clamp is? make sure it doesnt leak

yeah, its a slip joint, and yeah it does leak... but will weld it up when I put the bung in

Guessing you mean source of reasonably priced ones? I got one delivered from 14point7.com a few weeks ago for $200nz delivered. Nice little unit. Uses a few of his controllers and have all been good.

Opps yes, I did... looks like they're out of stock at the moment... but that's about the right price

Is the exhaust of the left a dummy? Hard to tell on phone. If it is id go on the corner just after that resonator.

left hand side is the waste gate outlet...  theres not risk, of it being too close to the end of the exhaust after the resonator?