-
Posts
60466 -
Joined
-
Last visited
-
Days Won
595
Everything posted by tortron
-
-
Someone's been watching Thai bike mechanics turning aircon pumps into engines Also an aussie made something similar using thr wave thingo
-
Tricot? https://www.bidbud.co.nz/4232152572
-
Kimjon's next money pit - BMW Airhead cafe racer build
tortron replied to Kimjon's topic in Two Wheels
-
There's a big list of "open gear" grease and sprays available, I'd imagine any are fine (they are literally called open gear grease)
-
They are still made, gargoyle was a mobiloil brand name
-
SR2’s 1947 Vauxhall “Rigamortice” Discussion thread.
tortron replied to sr2's topic in Project Discussion
If you like that, you'll love this Moss supercharger thread on the MGexp forum I had one of those overflow bottles, did you buy it around 12 years ago? -
SR2’s 1947 Vauxhall “Rigamortice” Discussion thread.
tortron replied to sr2's topic in Project Discussion
-
4x110 Rx5 has 4x120
-
Deoxidine instructions say wipe off with a clean damp rag before it drys. Then wipe with a clean dry rag or prepsol before paint
-
-
Yanks claim they last longer than you might expect, so no biggie for racecar
-
My 3.8m8 ute has a nzdm spec buick V6, and no oxygen sensor as it has a nz leaded fuel tune still on it It runs on intake air temp and a map sensor
-
There's one in mangare pickapart, it had a lot of spares in it
-
So batch fire injection Crankshaft sensor only so squirts at TDC and bdc on paired cylinders Like a 3.8 m8
-
The bar adaptor looks like you could make it with some thick wall pipe and a ball This one didn't sell, might relist https://www.trademe.co.nz/a/marketplace/sports/cycling/bike-accessories/bags-pouches-panniers/listing/4162084073 Some plate with a locating hole for thr ball to sit might also be an option
-
Remains of a spider
-
I will look here, but have to unsolder the battery's to get under it
-
Yeah that's what I would think, there's no other wires, it's all pcb and surfacemount
-
I tried that before I opened it. The cells are fully charged, it seems to be a issue with the board somewhere
-
No they are all equal
-
What's the scam here Ryobi 18 4.0 ah battery Issue: doesn't work. Plug into charger and it goes straight to full green light/fully charged. Front led check shows 1/lowest charge Voltage across terminals is 0v Open battery up, test the cells and get 20.8v Thermistor has continuity and 20.5v either side of it. 0 voltage at board for neg terminal Is there a fuse somewhere, I don't see any obvious damage
-
Eastcapescapade #6 2022 November 11th, 12th, 13th
tortron replied to johnnyfive's topic in Upper North Island Region
I believe that's going from matawai to gisborne -
Eastcapescapade #6 2022 November 11th, 12th, 13th
tortron replied to johnnyfive's topic in Upper North Island Region