tortron

Is that like stranger danger

Yeah mate original Austin made A series.

Spray some ether down its gullet and see how it fires Will eliminate a fueling issue at least,

lots of parts on ebay. postage is lots tho

Battery sounds healthy still

What's the battery read when you are cranking

Doing the clear is like an hours more work, mixing, spraying, and cleaning. Yes for UV resistance, which in NZ i think is pretty important id do clear, nice and thick so you can polish out any future scratches, get a better gloss off the gun

1 BMC is also available

suit you sit, suit you https://www.trademe.co.nz/a/motors/car-parts-accessories/personalised-plates/listing/3237655409?bof=bkJmwL1O got that morris marina mainia

Bog absorbs water. Primer absorbs water. Decent epoxy like durapox, and then don't let it sit about outside before getting top coat on

YoEddy would need a lot of gloves to cover a whole head

My touring bike was originally racing green and is now rivergum Two tone of that red and blue

Really it's just wanting heat so some nichrome wire and a power source, then press it on would pro a ly work

I agree, but maybe work for going in a microwave

Yea I'm not totally in love with it, would sell Waiting on parts before I do anything much

i believe its just conductive ink, you could try a circuit repair pen

diy my man

just applying the linseed oil? no sanding/polishing?

still running a generator on it? probably the battery has had a hard poorly charged life and is passed it 9.5v under load is right at the time to look for a new battery stage

How many hours running tho

Gt40 fine, gt40R not fine

Pertronics set ups want minimum 3 ohm coils if I remember correctly, can't use a coil that was for a ballest resistor system (i. E if it's a gt40R) The high performance coils also caused problems, due to the output

simple green has been doing some good things to my oily filth, cleaned my oil soaked carpets out with it and no complaints