Jump to content

RXFORD

Members
  • Posts

    1,450
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by RXFORD

  1. Mine and Clints party areas actually measure up the same. We compare regularly. Hes just got the ability to fit a few midgets in the back of cab. I'l slide into ya dm's with the dirty pics.
  2. I could sell you my one instead...Its shorter, so will be easier to park at the stripclub.
  3. Are you doing the old 'mexican day-labourer rachet strapped to roof with a squeegee' wiper mod?
  4. Just chiming in on your driveshaft dilemma... About a month ago I had Russel at Driveshaft Specialists shorten, assemble and balance a customers shaft for me. I prepped, painted and fitted new universals in the front half (d21 navara 2pc), and he shortened the rear section, then added a hilux slip joint that I supplied, then fitted new universals which I also supplied. It only cost $250ish for his portion of work. And the 3 new uni's that my customer supplied cost less than $100 for the lot. What I'm getting at with that novel, is that if you buy and fit your own uni's, getting the shaft shortened then balanced once you assemble it would only be a couple hours work for the shop doing it.
  5. Whats the deal with parking for older cars. Last year there was alot of 80s cars parked up near the starting line, rather than in the back paddocks. In the email I recieved from them it says only pre '78 or something? Planning to take Cordia along, just be nice to park a little closer.
  6. Tickets booked for Sat, gonna take me old boy for a gawk.
  7. Yeah I've read that in the past and struggle to believe alot of it. I don't know where that info comes from but could just be interpretation. My Ckd 55 is exactly a 55. My Ckd 67 is exactly a 67 which I have a Birth Cert for both. All my Nz assembled 60s parts cars have been rego'd to the year the body/engine/pan numbers they came with and have had the correct features to match.. So much of it does not relate to my stuff which doesn't make sense. Cool car regardless. Welcome to the world of unreliability.
  8. Saw this at Zebra yesterday. Looks good. Curious as to why you call it a 68 though. It has 68 traits at all..
  9. Did you find it on the side of the road in rolleston?
  10. cheers guys for the help, just need sum spare time now
  11. cheers guys for the help, just need sum spare time now
  12. i just put the standard 1300 bak in the esky but put a 4 speed box, to my horror i didnt fit proply and the diff/driveshaft hav to be changed, i also thought the auto eskys already hav a hole for the clutch cable to go through but mine duznt, the auto gearbox mounts are furthur bak and wider than the manual so without to much truble what can i do there? and also the becoz the manual box in shorter what can i do about the driveshaft? i was thinkn use the manual shaft and diff and see if that works, cheers... matt
  13. haha i had the positive terminal in my wagon touch the shell of thhe car coz the battery didnt hav a thing to fix it into place, and it melted the earth wire then went through the clutch cable and it caught fire, the car turned off and all the power went out, we probably hold the world rekord for the quickest exiting of a car...
  14. RXFORD

    Leaf Springs

    allgud no hard feelings...
  15. RXFORD

    Leaf Springs

    how come all the questions i post always end up in an argument between dodgy_rotors and lowlancer ??? cheers d_r ... u seem to know alot of dodgy shit that i wana do .. lowlancer u dont seem to know shit so if ya dont mind can ya not post and argue if ya not gona answer the question...if ya gona ansa the question thats fine....
  16. RXFORD

    Leaf Springs

    what is another way to lower ya car if its got leaf springs in the bak...without getting blocks put in how do u flip the leafs and how do u add another leaf
  17. ... or what cylinder shud be closed to be at top ded center
  18. anyone know what the firing order and the timing shud be for a '85 323 wagon(1500sohc)
  19. RXFORD

    Locking Diffs

    fair enuf
  20. I just got hold of a '85 323 wagon(the ugly fronts) and im keen to chuk a 12a in it. i herd a rx3 crossmember has to be used in the coversion but what else do i need and how hard is it? any help wud be appreciated
  21. RXFORD

    Locking Diffs

    no need to bitch about safety and all the shit people, i just wana do skids without having to buy an lsd... hey lowlancer... least my car isnt photochopped... cheeers dodgy_rotors for the advice
  22. RXFORD

    Locking Diffs

    i hate little kids they are so fukn noisy, y wud i kill 1 anyway?
  23. RXFORD

    Locking Diffs

    i herd u weld the pider gears or sumthing... haha wikid skids on then... the car is gona be illegal so 1 more thing wont make a difference
  24. RXFORD

    Locking Diffs

    dont they make u do good burnouts though?
  25. RXFORD

    Locking Diffs

    how do u lock diffs, welder?
×
×
  • Create New...