-
Posts
23 -
Joined
-
Last visited
About SKEVAN
- Birthday 29/06/2005
Profile Information
-
Gender
Male
-
Interests
Bikes, Cars, and Angry music
Converted
-
Local Area
Hawkes Bay
Recent Profile Visitors
3,697 profile views
SKEVAN's Achievements
Member (2/5)
115
Reputation
-
Update on the cressida, after a bunch of not working on the car, i have ripped the 5mge out. Gone burgers. engine bay has been mostly stripped, dumb faulty cruise control vacum pumps are in the bin and shes looking empty. Ive finaly made up my mind on what im going to do with it, R154 and a 1JZgte Non VVTI, ive got the manual pedals ready and master cylinder, brought a haltech elite 2500 off a workmate for a steal. (and hes also make me a MEKE custom Loom). all im missing is the heart and transmission.....(and fuel pump, fuel reg, rad, powersteering relocation, etc) other items, ive recently slapped in BC coilovers front and rear, fronts were welded to the knuckles by SUSPESION TECH with crack cert which is lovely. got a fresh custom wheel from Jeffs Emporium which looks sick. next step is tucking the wires in the engine bay and riping the dash out so i can remove a bunch of excess wires i dont need anymore. and trace some back. enjine is up for grabs, flick me a offer and its yours, other wise its going to scrapys next week
-
Update on the cressi. The 5m is still alive. after fixing most of the legality issues, boring bushes tie rods blah blah, i sent her in for its first yearly wof, passed first go. so i did the only logical thing and proceded to rip apart the motor and gut the interior for a spruce up and make it undrivable. now that ive got the head issue fixed and my sparkplugs are both sparking and plugging, ive turned my attention to the fuel leaking where it shouldnt be issues and brand new oil leaks 🤩 (rockercovers, and the distributor O ring), first the fuel. after ripping the rail off and apart i found all my rubber seals on my injectors turned into VERY VERY HARD rubber seals and were borderline imposible to get off. but after a bunch of searching i found some oem ones in japan so i have a full set on the way. and also replaced the rocker cover seals with nice blue ones which go well with my newly painted covers oh also big update, there is now a turbo and manifold waiting for install, Got a oil tee in the block for a pressure sensor and a turbo feed, need to fab a downpipe to dodge the steering colum gutted the interior, going to source some new front seats, hopefully some Evo recaros or similar, and going to do some experimenting with a different rear seat, wanting somthing couchy esk, might do some measuring and find a c33 laurel rear seats and see what i can do with those. wanting the couch but sporty aspect for my rear passengers. dyed the boot and parcel shelf black to hide all the ugly stains and make the interior one clean colour forgot to mention i put bonnet mirros on cause why not, and ive persued getting coil overs they are sitting in my shed waiting for funds to be sent to VJDcerts to be sorted, but waiting for turbo to be complete to get everything done at once after a couple parts if anyone has spares i can buy off em or recomendations for where to grab stuff. CT26 turbo (7mgte and 1hdt turbo), 1/8th npt fittings/oil lines, 3inch exhaust piping stainless (enough for a dump pipe),
-
cheers bro, got his number off the Cert supplier list, will flick him a message in the morning
-
Kia Ora gang, just got my first yearly wof for the cressida, passed, but my front shocks are on the way out. which draws me to the decison of coilovers. im wanting to get a set of BCgolds but they require 1. welding 2.Cert although my welds are okay, ive heard that welds need to be Xrayed, way outa my paygrade if you know anyone that has experience with welding coilovers please let me know. if theres are crowd that will set em up and can do certs at same time, that would be dope.
-
im thinking its about time to start ripping the whole front end apart either ways, going to take all the suspension out and absolutly abolish all of the oil ive collected from the different oil leaks ive had. ive got a backup vehicle so i think its time she gets the love she deserves. and nice hearty deep clean. will keep the engine close by incase parts come up on facebook
-
Disaster has struck again, my extremely reliable toyota has become not that, after replacing the spark plugs i noticed the previous owner left a surprise for me in ciylinder 6, a spark plug wrapped in thread tap, now why would you need thread tape on your spark plug...... could do with the fact the threads in the head are completly gone..besides one single thread holding onto my 5m's hopes and dreams. but its about time she gave up the ghost, the rings are starting to go, the fuel injectors are still stock for 40 years ago, all the pullies and whining and seized on and for 390,000kms the old girl has done very well for the thrashing its recieved. so for the next couple of weeks, the engine bay will be getting emptyed cleaned (along side my wallet), and preped for a future endevor. a 7mgte is hopfully what will be replacing the 5mge. period correct, still m series, and churbo. please offer any advice or input or past experiences youve had with such motors. (if anyone has a 7mgte laying around, dont mind the condition as i want to have a go rebuiding a motor please hit me up in the discussion that duddly opened) to leave you all, i give the final image i have of her while she was running next to the bros landy. along side milo the dog. for now the cressi may rest in peace, but she shall be thrashed again another day.
-
just slapped the resistor in this morning, awesome way to unlock some power, gonna keep a eye out for a boost gauge and egt gauge gonna take it to a muffer shop and just get a quote for them to do it. and then start saving for a potenial head, got a funny problem of coolent bubbling in the coolent resevoir after shutting it off, and after extended driving she gets a bit white smokey.
-
Might low ball the dude either way, it’s been up for sale for ages and if I get it for my asking price it will be worth just cleaning for resale. Will come back with results on Sunday
-
Chur chur, got a 1997 Prado 90 with a 1kzte, which are known for shit exhausts causing high egt’s causing head warping and what not. ANYWAY, there’s a 1kzte exhaust off a 120series on market place local for a good price (3 inch stainless) and I was curious if they fit similar ish. Hanger position aint that much of an issue. I have a welder and a engineer on speed dial. any info is much appreciated
-
I’m assuming mine is the same as your nzdm in the regards to no o2 sensor. Some US forums say o2 sensor. May have been an emissions thing to require one in the US of A. will have a look into the cold start injector. Haven’t seen that issue in forums but a hell of a good lead. another thing I will try is the fpr. See if it’s gummed up or shitty in some regard. Will replace if required too see if that helps in any way Thank you for the help team
-
AIGHT, quick little update as fuck all has been done recently due to a bad case of the busy. but all the oil has remained in the sump that i know of, but we have more problems. i know... shock and horror NEXT on the to do list is stopping it from running so ungodly rich, like so rich that i pulled up next to a GRUBBY SV6 commy and the driver had the audacity to make the stinky gesture too me....which was completely fair. now first place to look would be the o2 sensor right? because all the forums i read dictate so. BUT ALAS mine does not have such a amazing device. and i have no idea why, everyone else has one.... WHY CANT I. im happy enough to weld one in but god knows where to plumb the wires (please help on the discussion thread if you have a idea) in the meanwhile i dicked around with the MAF, which was probably as effective as a gorilla with a flat head and a stethoscope. but i mean i managed to lean it a lil bit and it still sounded healthy. but the delecious smell of 95 still wofts into the cabin. i will be getting a AFR gauge and somepoint soon so i dont lean it out and blow a hole in a piston. but they are spendy as FUCKKKKKK. so if anyone has any laying around i would love to buy one. next on the cards is getting it a wof again so i can stop looking over my shoulder for a green sticker waving in my direction on my ways to work. and any advice please let me know! i shall leave you with some pictures of me redoing the carpets and a picture i took of the maf cause it looks funky :3 EDIT, Photos arent uploading for some reason
-
Update on some bits and bobs, the other day i ripped off my sump which also required me taking out sway bar linkage and Blah Blah Blah. long story short i had half my sub frame out and gave it all a nice waterblast....which uncovered a bunch of rooted bushings and both tie rods were shot. so that was a lovely find, thank god that stuff is cheap and only like 200 bucks later ive got new bits coming from whiteline. DHL hates me i guess and straight up said nah fuck this guy and are holding onto my bits till tomorrow cause my dopey ass didnt sign the leave at front door waiver >:(. about a week ago i brought a m12 1/2" impact for a steal and to continue my milwaukee fan boy collection because im a stoopid apprentice compensating for my lack of brain sells with cool font and the colour red on my tools, (red is go fast colour). but would highly recomend a dedicated battery impact WRENCH not driver, it has done wonders. But update issssssssssss Sump is back on and has a gasket for the first time in probably 250,000 kms. cross bar/swaybar/thingymabob bushes will be installed tomorrow, will be starting to rip out my cruisecontrol stuff due to it taking up alot of precious engine bay space. not good update, i found more oil along the head around the ignition plugs with no evidence of rocker covers leaking or anything. but i guess toyota engines love oil being anywhere except inside the fucking motor. will post update on weekend with a video of it running, and potenitally installing a elec fan cause the viscus fan is louder than the actual engine.
-
Righto, Soooooo i have been prompted by my father (Duddley) and mother (cazza) to begin keeping track of my project Cressi in the projects section of the oldschool forums......which doesnt seem like a daft idea. As any teenager with a imagination, and a addiction to 80s and 90s JDM cars i fixated on the square style of 80s toyotas, Since i was about 15 i NEEDED a car with style points and with room to modify, I would froth at the mouth like a rabid pitbull next to a toddler at any listing on facebook and or trade me. and as of october last year my date with fate arrived in the shape of a gorgeous 1985 MX73 Cressida GXL. (THE Cressi) SHE HAS EVERYTHING. (except working rear windows, working AC, Speedo that reads the correct numbers, and a fuel gauge, working central locking.) BUT IM TALKING; AHEM...DIGI DASH, 5mGE, Electric Windows (fronts), CRUISE CONTROL (which i will be deleting). for 1985 thats pretty damn cooooooooooooool The car was in nelson....I was in Hawkesbay......So i took a plane down sight unseen and brought it and drove her back, very very bold, but payed off awesomly for future me, (at the time me had to wake up for work 2 hours after i got home) issues i needed to address immediately were a oil leak and some wheel bearings.... so naturally i waited 5 months before i got my ass into gear and sorted it. anyways i shall leave pictures, and come back when i do somthing interesting.
