TheAudioDude

So the thats the current state of the sedan. Not pretty but its just paint. Which will be sorted soon! Those are the two wagons I own. Unfortunately UH4099 is no long. Its sitting there under a cover until I get another chassis rail for it. Because some kind young girl on her phone decided to drive into it. Hence I now have another which is being done up. Which is why the paint has been delayed on the sedan

I think its been 4 years or more since last posting on here and now its time to get back in to it. So I found this rust bucket cheap and thought Id buy it and see if it was worth having or if it was going to be parts for my wagon. Here is the two sitting together, that sedan was made from bog but it was complete, running and some how legal. It had a bodged up turbo set up with a front mount intercooler on a non turbo B6 DOHC engine but this and the wheels seemed to be the only things not factory about it, from the history I have heard these items appear to have all come from a yellow BFMR 'TEGZ", A 2000s show car. First job, swap the 17s with the factory steels I used to have on the wagon, find the guys stripped the hex off the nut...... lots of swear words and a new 13mm drill and a spare hub from the shed, I didn't have tyre rub anymore. Next was my 4 cylinder turning 3 cylinder. Lucky I am an absolute hoarder of parts and had a complete non turbo B6D motor box and loom sitting there. Stuck this in, only took an afternoon to swap it all and had it running. Drove it a few times, about 500ish Km and the bottom of the drivers door fell off, into the garage again... where its mainly been sitting for coming up 2 year. So started chipping off paint every where to see what was and was not metal. So off come all 4 doors, Bonnet, Boot lid. all full of rust. I had a full pre-facelift turbo front so the went on. Found a 1986 ford laser ghia sedan at zebra so all four doors came off that, then a trip to whangarei to get a boot lid, swapped all the electrics, trims and glass over as its all different, NZ production laser vs Japanese production familia. Now the fun job of getting a couple of hole in the boot floor welded up. Now just waiting to get it painted. Zebra had a 1991 Ford Capri XR2 Turbo, very rare car but could not save it unfortunately, but it gave me a full turbo engine and loom that was stock and 90% the same as the BFMP. So this got taken out in the morning and then swapped in the car by the afternoon. Adapted the capri engine loom and ecu to the familia body enough to have it running. Found the engine had been over heated and the head was slightly warped even though it was advertised as "running engine swap". once again lucky I had a complete spare off another engine I own that as a cracked crank. So this went on. I now have a completely stock running and driving BFMP with almost no rust. Since then I have just been slowly perfecting items. Finding oe intercooler mounts, factory mazda FC/BF momo wheel, Digital Turbo instrument cluster, also been finding and restoring period audio gear for it too! Found these brilliant Alpine 6420 Speakers for the parcel tray 7kg each!, found my 80s pioneer amp to drive them and an 80s nakamichi cassette head unit and modern alpine 4inch components hidden in the front. Now just planning how to convert the v belt on the alternator to a multi groove so I can up grade the size of the alternator on it. Ive spent a lot of time mating the capri engine loom to the body/dash loom as there was a few issues that were throwing me off the actual issues. After replacing a few sensors and things and triple checking what Ive done its perfectly mated up. Loads more to come and the whole story of the wagons too.

Too Busy to do audio because of telstars.....

Are Radisich telstars allowed???? One of thems deregistered, WOF just expired, plates off the other one on it, so this meets the criteria right???

Bad reporting!!!

From NZ herald: On the subject of local assembly, a model now fondly remembered by many motoring writers and former owners was introduced: a Ford Telstar V6 bearing the signature of local racing driver Paul Radisich, who had won the World 2-litre Touring Car Championship race earlier in the year. Ford New Zealand made 145 examples of the Radisich Signature Telstar, all finished in cobalt blue with a body kit and spring and damper package developed by Radisich at the Pukekohe circuit. On monster 16-inch wheels and 205/50 tyres - or so we thought at the time. But it was good. Anybody out there got one?

Wanted!!!! complete KJ-ZEM

Yep both are paul radisich edition pre face lift, as standard 2.5L 121kw v6, 5 speed manual, full Bilstien shocks, custom springs done by Radisich, Momo wheel and knob, 16x7 ROH Astrons

Yeah I thought about that. Need engineers report and stuff as it's 1994 need to know more tbh who should I talk to on here??

So the question is. What should I do with the green telstar, it runs and drives perfectly just wants a front bumper. It's deregistered so track car???? I've driven it with my other ones plates on it hahaha

Soooooo I'm the reason Mk2Marty bought his Radisich edition telstar. He found mine addicting. The story of mine is I bought it dirt cheap in January as a tiny bit of a project, in the time I've owned it, I've replaced the windscreen, radiator, various coolant hoses, replaced the coolant 5+ times, also replaced the engine oil and filter , gearbox oil, brake fluid, all pads, rear discs, tie rod ends, all cv boots, suspension bushes, and got rust cut out of the roof where it had cracked the screen, also have replaced the speakers with alpine 5x7 type R in the back and infinity kappa 5x7 components in the front with a big old pioneer/carrozziera amplifier. Then the alternator voltage regulator shorts out, so instead of paying $470 for a new alternator I bought an entire Radisich edition telstar for $250 which had an almost new alternator on it

Need to get your one back on the road

It maybe mono though

Yes just bypass the mic pre amp

I don't think so???? I could be wrong. Seen a few S3 running the better looking s2 wheels

time for a 302w then

is the head gasket gone on yours?

Could be worse, I'm going in a telstar

Bostik 5614 mastic is great stuff

Can't believe it, third year running the work Xmas function is the same day.

The stuff I get is odourless

That's OK I'll see what I can get a set for.