smokin'joe

is it an MSNZ cage ? if so, would pay to check with tech. office. existing cage in my TE71 can only be modified either original builder, or with his permission..... unless they have changed that rule as well in last 2 years

@Toddy415 know anyone ?

if the brake is insidethe end housing, it should be fine . if it in the cable drum, dyneema will melt.

did you buy it ?? i tried to get it, but someone had first dibs, then stopped messaging

different batteries may even keep the positive terminal further away from contacting metal body parts, maybe

did he move from big shed in Redruth ?

Steve Rhodes in Temuka

another option is rewinders / tool repairers.

or smoking British electrics !!

is it a street-line garage, or set-back from footpath ? street-lines usually cannot be replaced with complete new structure, so would need to be rebuilt. usually new/permitted structure will require 5m set-back from road boundary, unless it's a 'carport'.

you are enlarging the lintel span, therefore structural, especially if a heavy weight roof, or if you are removing a bracing element to do so

deeply apologetic, have a good friends 'random' wedding in Darfeild, so might try and sneak to CHCHUR to talk shit with those lads before hand

any truth that silicone bronze wire can be used for MIG welding cast ? need to do repairs to spare coal range before installation

it could be already loaded, but i like your optimism of a successful day !!

was mentioning the the run through the middle with my son, but we normally have a tandem trailer on the back. if it works, we could leave trailer somewhere and tag along

often coming through Dunedin, but not in an old school ride. probably need to organise counter-terrorism when the shit-box marathon comes through in January.

raise dissy, rotate rotor 180degrees, then reinstall.

if dead rego before 91-ish ? when the system went digital, it will say plate not issued, never been registered etc

need to rebuild it before pics. we found most of the operating side on weekend. need to find/make barrel and locate the air solenoid

better rebuild the super-Nerf 200. 600mm 1/2 copper barrell 12v airhorn solenoid and resivour 12v 4wd-shock compressor jam D6 reo-bar down inside of Nerf bullet for 200m approx distance. will use lead this time, so i can surf-cast hopefully 250-300m

if you are removing the doors to make access easier, ensure you have the door card available for position the side intrusion bars. whole lot easier to shift the bar during cage build, than to relocate door handles / latches / etc....................... not that i have done it!!!!!

100+ from NPD and the full vacuum lung cleaning method

i found waterbed heaters (if one can still buy then) are decent as they are easy to clean. lecky blanky get manky quicky

exact wording i would have used running Migmate 180 with straight Argon and very hard to get an even consistant weld through the torch, as a slight bend will slow the wire down

a weekend meet could be a goer ? beer and snacks or sommit i am often up during week, but always on mission, as i fecking dislike CHCH on weekdays !! so need to have extra excuse for a weekend visit to get some jobs attended to