AllTorque

WOF rules say the headlight must be designed for LED. So you can replace the whole unit, but not put and LED inside something designed for Halogen. Some LED H4s are better than others. You will want to make sure there is a defined cut off at low beam and not a blobby blurry light.

Just behind 

https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/tyres,-wheels-and-hubs/mudguards#tab2

You are looking at “Reasons for rejection” so it will fail if the light is not any of those.

/plate lights must be white.

Gas shocks have oil in them too.

If you push down on them and are not hard to push or they move fast, they are bad.  If they are not extending back up by themselves, they are bad.

https://bringatrailer.com/listing/1958-austin-healey-bugeye-sprite-12/?fbclid=IwAR2r87uwqT2HClQg7leMM3R2luGDYlrfQW43XZRwPWrcBOWFxTDcehYpT34
 

Goldwing powered Bugeye Sprite

@GuyWithAviators & @Mop Head

You guys are big fans of these aren’t you?

https://www.braxtoncarlights.co.nz/shop/automotive-lights-search/toyota/AURIONCAMRY/TOYOTA+CAMRYAURION+-+ACV40+-+4DR+SEDAN+-+2006-/headlamp-lh-electric-manual-black-to_suit-toyota_camry-aurion_2009-f-lift_sport.html

Surely you can find a headlight from a wrecker.

https://www.trademe.co.nz/motors/car-parts-accessories/toyota/exterior/listing/3844290750

Spotted an old one today 

https://www.chase.co.nz

Frontal impact is from 1999, but I would fail due to 1. a) https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/vehicle-structure/structure-incl2.-frontal-impact

Glazing markings do not have to be the same. Only needs markings on windscreens and flat glass.

https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/vision/glazing#tab1