Ghostchips Posted February 27, 2017 Share Posted February 27, 2017 Back in the old days i would have soldered 2 cent coins over those holes. 2 Quote Link to comment Share on other sites More sharing options...
ProZac Posted February 28, 2017 Share Posted February 28, 2017 I know you're all about the OG, but an aftermarket radiator for an S13 that came with an SR20 is a pretty easy swap into these. Size is right, outlets are right, just needs some mounting points added to bolt to the front support, and a bottom support fabricated. Quote Link to comment Share on other sites More sharing options...
bigfoot Posted February 28, 2017 Share Posted February 28, 2017 I still have my starion radiator if you want to grab that to try. I'm not going to use it anymore Quote Link to comment Share on other sites More sharing options...
0R10N Posted March 3, 2017 Share Posted March 3, 2017 @bigfoot Does it have the bit running down the middle with the mounting points for the fans? If so I'll keep it in mind as a backup, but for now I'll just get the existing one repaired under warranty. Will let you know, cheers! 1 Quote Link to comment Share on other sites More sharing options...
bigfoot Posted March 3, 2017 Share Posted March 3, 2017 2 hours ago, 0R10N said: @bigfoot Does it have the bit running down the middle with the mounting points for the fans? If so I'll keep it in mind as a backup, but for now I'll just get the existing one repaired under warranty. Will let you know, cheers! Can't see from where I can get to in shed, but it has fans still on it so I'd say so Quote Link to comment Share on other sites More sharing options...
Bling Posted March 3, 2017 Share Posted March 3, 2017 Looks pretty bad inside, so could just be a matter of time before it splits somewhere else? Quote Link to comment Share on other sites More sharing options...
0R10N Posted March 3, 2017 Share Posted March 3, 2017 Not sure to be honest - it certainly looked fine inside when I got this radiator back from the reconditioners, and they gave it a clean bill of health after flushing it out, cleaning and pressure testing, but it doesn't appear that they re-brazed or did much else with the end tanks except paint them. Guess I'll find out after they take a second look! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.