escort74 Posted October 25, 2015 Author Share Posted October 25, 2015 Bracket and Brake Reservoirs Fitted Engine Back in Syntec Historic Linkage arrived and Fitted 9 Quote Link to comment Share on other sites More sharing options...
Popular Post escort74 Posted October 26, 2015 Author Popular Post Share Posted October 26, 2015 A few photos before it goes back into the garage playing with Some test colours for the alan mann paint scheme 14 Quote Link to comment Share on other sites More sharing options...
escort74 Posted October 29, 2015 Author Share Posted October 29, 2015 Polycarb window in properly made up some alloy window supports and carbon wrapped them 4 Quote Link to comment Share on other sites More sharing options...
escort74 Posted October 31, 2015 Author Share Posted October 31, 2015 upgraded the starter motor with a road runner item ditched the old Nissan single pots for wildwood 2 pots 2 Quote Link to comment Share on other sites More sharing options...
escort74 Posted October 31, 2015 Author Share Posted October 31, 2015 Boot stay 3 Quote Link to comment Share on other sites More sharing options...
escort74 Posted November 7, 2015 Author Share Posted November 7, 2015 Fuel lines 5 Quote Link to comment Share on other sites More sharing options...
escort74 Posted November 11, 2015 Author Share Posted November 11, 2015 harnesses been fitted Driveshaft been made up breather tank and lines plumbed in 6 Quote Link to comment Share on other sites More sharing options...
escort74 Posted November 12, 2015 Author Share Posted November 12, 2015 gusseted the g/box crossmember made a driveshaft loop arranging some secondhand tyres and wheels for the track 5 Quote Link to comment Share on other sites More sharing options...
escort74 Posted November 15, 2015 Author Share Posted November 15, 2015 Brake lines installed with help from GSS 7 Quote Link to comment Share on other sites More sharing options...
escort74 Posted November 16, 2015 Author Share Posted November 16, 2015 Wiring Time with help from my trusty electrician "dad" Also made up a temporary centre console for the essential gauges 9 Quote Link to comment Share on other sites More sharing options...
Popular Post escort74 Posted November 21, 2015 Author Popular Post Share Posted November 21, 2015 Brake pads in , fluid topped up Bled the brakes Set the tappets , filled with oil and water almost time to start it 12 Quote Link to comment Share on other sites More sharing options...
Popular Post escort74 Posted November 28, 2015 Author Popular Post Share Posted November 28, 2015 Found the reason the car wont turn over Lack of clearance between teeth on flywheel to starter motor causing it to bind Made some mods to the starter gear Turns over but but wont start properly checking over the carbs and found the accelerator pump assembly had come apart Back together again First start up....finally http://www.youtube.com/watch?v=94XKnQGsmwM] 16 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 1, 2015 Author Share Posted December 1, 2015 Weigh in time Loaded on the trailer ready for part 1 inspection for the cert 6 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 14, 2015 Author Share Posted December 14, 2015 The initial cert inspection went well , I have a list of 30 things to rectify. I've got myself a fair few jobs to get through now , nothing major though so Im very happy Last minute jobs before the first event Motorsport scrutineer has signed off the log book so we are good to go 2 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 14, 2015 Author Share Posted December 14, 2015 The Line up 8 Quote Link to comment Share on other sites More sharing options...
Popular Post escort74 Posted December 15, 2015 Author Popular Post Share Posted December 15, 2015 Too Much fun Until this happened Great first outing in the car , a few setup issues with the pedal box and then tyres that didnt want to stay on , but overall very happy 11 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 17, 2015 Author Share Posted December 17, 2015 Had some rubbing issues at Puke so have spaced the rear calipers Back together Made up a new support for the handbrake as part of my rectification for the certification / MSNZ regs Getting a new brake pedal water cut so my pedal box can pass cert 5 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 20, 2015 Author Share Posted December 20, 2015 Got some bushes machined up to press into the pedal Should be cert worthy now Tunnel extension to stop the drive shaft touching the floor 3 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 24, 2015 Author Share Posted December 24, 2015 Merry Christmas " Project Alan Mann " New Wheels and Tyres Dragged the four door out for a photo too 8 Quote Link to comment Share on other sites More sharing options...
escort74 Posted December 30, 2015 Author Share Posted December 30, 2015 got the 14" wheels blasted and painted and some new semi slicks wrapped on them Hampton Downs Bound 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.