NicT's Trueno Notch (AE85)
Posted 02 March 2011 - 06:45 PM
Dirty little notchback i picked up in exchange for my 1uz Crown.
4age (bigport, factory 86 motor)
Coby headers (poo)
Niteparts 4a-W55 Bell
Hilux Shortened Diff (factory sloppy LSD)
HKS Adjustable heignt/dampening suspension
TRD Rear springs
Monroe Hilux shocks
Facelift front bumper/TRD Lip Copy
Wheels are borrowed
Mean MEAAAAN little car. Absolutely in love. Took the sideskids off, repainted the front bumper black, repainted factory rear bumper which i intend to fit when the weather isnt so terrible.
Body is in pretty rough condition asthetically, but rust looks like its been repaired then repainted in por15.
Clutch is absolutely poked, but i deal with it.
So happy. Will have driving photos after 12th of march from hampton downs.
Posted 07 March 2011 - 08:21 PM
How i got the car
How she looks at the moment
Desperate to get this back in the car before saturday
Wheels i tried to fit but tires are too big they rub on the guards... 70mm bigger diametre then the wheel/tire combo that came off it. Sucks mega. Just need to stop being cheap and buy some R55's
Got a GZE flywheel from my mate. Super stoked. Got it machined. Waiting to get pressure plate and clutch plate then fit back to car.
Flywheel that came out was 200mm contact surface flywheel. that was slipping bad. I got this remachined and i was going to reuse but GZE came up and i think its a better option.
Also refitted factory rear bumper and found they who ever painted it didnt bother to paint under the factory bumper so its still silver..
Posted 12 March 2011 - 09:37 PM
Hampton downs skid pad.
One of the poor guys was doing gymkana at the end of the day with us and his front wheels bit in and he flipped his KP.
Posted 27 March 2011 - 08:55 PM
Will try get better photos when there is sunlight
Not as good as the works, but better then the Advans so a nice compromise to make my car look tidy.
Posted 28 March 2011 - 06:25 PM
Now need to replace the LCA, a service and buy some tires for the next track day. Oooo yea
Posted 05 June 2011 - 06:12 PM
Did some skids, got real wet, had an awesome time and towed a sweet as mx5 out of the gravel.
Had a blast, learnt a SHITLOAD. Blew my diff, understeered heaps, and realised my handbrake doesnt actually work.
But learnt to clutch kick and slide good. Stoked it rained at the end of the day as diff became a single spinner at lunchtime which made dry sliding unachivable.
To do list,
- 6kg/mm rear springs, 8kg/mm front springs
- Front caster
- Next drift day on
Was going to do engine upgrades but i have decided i dont need more power yet, still have more handling issues to sort.
Also bought microsquirt for future upgrades, may install and tune it over the next week or so.
Posted 14 June 2011 - 05:21 PM
some artwork i started.
Flipped centers, car needs more low now i have new Grid II 185/50/15's just a touch of stretch
Dreams are free, and so were these in exchange for a small wiring job
This wasnt free, but its damn good. Waiting on some high impedence injectors i can swap in and then ill start messing with the tune and get the car purring factory before i start making mods.
'My diff brings all the boys to the yard, damn right its bigger then yours'
Rebuilt Hilux, new clutch packs, high center spring rate, new shims, heres hoping shes nice and tight
actually had a nightmare last night that the diff in my car was actually a T eries, and i had bought this G series invein.
LCA that got owned same time as the guard by last owner.
Oooooold school HKS adjustables with 1 piece cast in stub axle. These would have cost moonbeams in the day. Lucky for me it takes KYB AE92 inserts. So it currently has 8 way dampening adustable ones.
TechnoSpirit Copy headers. I think these are made by wolf mufflers. Awesome headers had a set on my last car
My last engine, in my last AE, it was an animal with very little mods.
My old car, i miss it
So plan still sticks as last posted. Fit diff this weekend (if my broncitus lets up), oil change, lower, caster adjustment, wheel alignment then more skids in july!
After that, then its megasquirt, tune, fabricate quad adaptor, fit my techno tuning copy headers, then wait for more skid days.
Hopefully after that start saving for cams, smallport head, and maybe start collecting parts and fabricating 2" stainless exhaust.
Posted 18 August 2011 - 06:21 PM
Some flanges laser cut
Mean as race table.
That is all. More to come soon
Posted 28 August 2011 - 08:54 PM
Saw my mate Doug after work to give his car a look over to find a misfire. Took it for a drive and found no problems. Gutted for him. This was the second car in my long history of cars i have ever wired up. 3 1/2 years old and still going strong!
doing my shiz at the inlaws as they are in germany for 6 weeks. Stoked as. This is how she looked Saturday arvo
Bottom end is in awesome condition, freashly honed bores, and within factory tolerence piston slop (practically none) Turns over amazing. So go to this stage and reoil bores so they wouldnt rust out.
Slapped rocker covers on so dust/shit doesnt get in my smallport head i am dummying up
Intake manifold beginings
Tacced up and test fitted. Had to go for a straight manifold as my aftermarket clutch master is in the way and a lot lower then factory (barstard)
The offending clutch master
So one weekend down. Need to finish weld manifold (will do tomorrow night), then look at this exhaust manifold.
Posted 04 September 2011 - 06:25 PM
Removed lights so i can paint behind my bumper
Sorted fixing my exhaust with left over stainless.
Thinking twin pipe all the way to the back with smaller mufflers? Good or bad points to this?
Broke microswitch on welder, had to bust out the soldering iron to fix
Also completely welded up my intake manifold, that took a couple house last night, with some minor hammer adjustment to make it straight again.
Will put up some more detailed pictures when the misses figures out how to use the Nikkon.
Posted 04 September 2011 - 07:16 PM
Posted 11 September 2011 - 11:43 AM
So here you go.
Stoked on my welds, getting better at tig welding the ole stainless
My sweet bobo-fet mask
New cam gears and socket mounted degree wheel.
Posted 15 September 2011 - 09:47 PM
Mean as book
Also finished mocking my exhaust. Need to mod headers, then when im sure they are going to be fine ill finish weld it.
Word to your mother
Posted 17 September 2011 - 03:57 PM
These Photos Sucked so i deleted them
Ah well, chop chop weld weld
Posted 25 September 2011 - 08:38 PM
Had to recut and remount exhaust due to some mods i made to the headers now put the exhaust in a different way.
Then spent all friday night and saturday day teaching myself how to do cam timing, taking the head on and off 3 times before finally assembling the engine. When to fit new cambelt and discovered its wrong. Good work BNT.
Was going to go check out some skid action at meremere but lucked out when the mighty stageae broke down. Had to spend a couple hours fixing that.
No photos cause its more of the same
Posted 01 October 2011 - 06:15 PM
Just need to mod sump, refit, fit oil hose then turn key.
Next update she hopefully should be running.
Posted 15 November 2011 - 08:54 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users