pusherman Posted April 23, 2014 Share Posted April 23, 2014 Morning osers may moons ago i scored a 3.75:1 ratio diff for my escort but less moons ago realised why it was free ....... No theeth in its mouth! Would an lsd replace this using the same crown and pinion and housing or where would i get new single spinner gears from? Quote Link to comment Share on other sites More sharing options...
vivaspeed Posted April 23, 2014 Share Posted April 23, 2014 LSD will replace the standard centre. I've got a Quaife one in mine which is a direct replacement. You'll need to set it up again if you change the centre, i.e. set the clearances and lash because it will have been apart and slightly different when it goes back together. Look at the Burton Power UK website. So many diff parts to dream about. Assume you mean that the centre has no gears in it, rather than missing the CW&P. Quote Link to comment Share on other sites More sharing options...
M_C Posted April 23, 2014 Share Posted April 23, 2014 Shaneo has the part number and details for the LSD centre he got after some research. Ended up a good price. Quote Link to comment Share on other sites More sharing options...
vivaspeed Posted April 23, 2014 Share Posted April 23, 2014 For most aftermarket LSDs it is cheaper to buy ex-UK and freight to NZ. Even with GST and broker fees it's still 2/3 the cost of buying from local suppliers. I got mine off Burton Power for an Escort 'English' axle which is the standard one and worked out to be under $1k landed. Quote Link to comment Share on other sites More sharing options...
mfordy Posted April 23, 2014 Share Posted April 23, 2014 Got mine from Palmside for $1095 but they've just put their prices up a bit.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.