Celica RA45 Posted April 2, 2014 Share Posted April 2, 2014 this is my new bus .its had a full respray inside and out .slowly staring to put bits back in 2 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 2, 2014 Author Share Posted April 2, 2014 its a ra45 GT that i have been putting together while racing the white 1, there are a lot of mods going on this with a cambered rear end with some toe abigger beams motor 2.4 stroker with tappered quad throttles and no vvti ,cams 565 thou lift and about 270 at 50 thou Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 2, 2014 Author Share Posted April 2, 2014 as it sits at the moment 3 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 3, 2014 Author Share Posted April 3, 2014 for the motor im using some new parts will also have new tapered quad throttles new 2 stage injection a special harmonic balancer etc 1 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 3, 2014 Author Share Posted April 3, 2014 pics of the quads my own design ,copy of a black top 20 v and with 2stage and ram tube 4 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 6, 2014 Author Share Posted April 6, 2014 ok have just taken the rear end out of the old car and have taken some pics of the wheels that are going onto it also have my dog box apart as i broke 1 of the selecter dogs also have finished the rack set up with a ae86 quick rack and also a ae71 column set up these are te37v rays about 500 each 2 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 6, 2014 Author Share Posted April 6, 2014 ok some pics of the broken box and the cut up white 1 and a few spare race motors some for customers and the others are mine 1 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 18, 2014 Author Share Posted April 18, 2014 rear end is in now and the rear pan hard rod with rose joints is finished ,still have to make the new fuel line was using 13mm alloy pipe for the e85 fuel .going to the new black anodised fuel line plus have to make brake lines up as well Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted April 29, 2014 Author Share Posted April 29, 2014 ok now up on stands ,have put in box and tail shaft 1 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted May 24, 2014 Author Share Posted May 24, 2014 ok with some new pics rear spoiler is on ,new steering wheel plus foot rest dumby motor is in plus moore trims are finished on the out side etc 7 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted November 1, 2014 Author Share Posted November 1, 2014 ok at the moment ,i have had the rear end cambered through race products in brisbane ,back end has now 2.5 degress neg with half of toe in at the moment getting some hats made up to suit the cambered rear end also working on the dry sump set up just have to finish off the alloy fittings etc 8 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted November 3, 2014 Author Share Posted November 3, 2014 here is a pics of the 2 stage injection 2 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted November 4, 2014 Author Share Posted November 4, 2014 dry sump lines done on the scavange side just have to do the -16 feed into the pressure sidefrom the tank and the oil filter back into the motor and its finished 3 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted December 19, 2014 Author Share Posted December 19, 2014 ok pics of my new cambered rear end done by race products in briso in some of the pics you can see the cambered rear its like a shim, and the other pics are the axles which are skinnier than the std f series axles the rear end now has 295mm dia and 24 mm thick 8 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted February 15, 2015 Author Share Posted February 15, 2015 ok have been doing the std car wiring before i do the motec loom etc pics for up dates Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted February 15, 2015 Author Share Posted February 15, 2015 ok in these pics you should be able to see 2 rear demister switches ,as the new front screen will have demister wires built in. so im wiring these in and setting the wires up. battery is going to go on the drivers side front so dry sump tank ,when it arrives will go on passenger front Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted June 3, 2015 Author Share Posted June 3, 2015 ok up dates with cambered rear end is in ,this rear end takes 3 litres of lsd oil and weighs 25kilos lighter than the other F series with big axles and bearings with the brakes .have now fitted the dry sump tank ,finished of the rear 1/2 fuel line from the tank to fire wall,.. finished the rear brake lines to the rear end etc have also done the radiatoras well 6 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted June 27, 2015 Author Share Posted June 27, 2015 ok have finished off the front of the car with grill and head lights with new lenses for the front bar and have put the canards on the side of the front spoiler . also have roughly fitted in carbon race seat to see for height and leg room 4 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted October 27, 2015 Author Share Posted October 27, 2015 ok some up dates seats are in new airbox changes air in take ,wiring is just about there and the grunter motor is finished.also oil and shift lights done 8 Quote Link to comment Share on other sites More sharing options...
Celica RA45 Posted November 14, 2015 Author Share Posted November 14, 2015 well this is out on the front yard in my drive way ,still have to re bleed my clutch .just have to get a wheel alignment and adjust to rear panhard rod next is to start setting up the car to handle turn 12 at the island 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.